Honeywell 408EU manual Set Time and Date

Page 21

Miscellaneous Commands (cont’d)

The display will show:

LCD Keypad:

BYPASSED: ZN1

Fixed-Word Keypad:

01

BYPASS

Set Time and Date

To set the time and date, press [#], [3]. Enter 2 digits each for hours, minutes, month, day, and year.

hours (00-23)

month (01-12)

minutes (01-59)

day (01-31)

year (00-99)

In order to acknowledge your entry, a beep sounds after you set each component of the time and date.

Turn Chime On/Off

Chime is an optional feature that causes the keypad to chime when selected doors are opened when the burglary protection is off or disarmed.

Only your installer can program a zone for the Chime feature, but once it is programmed, you can turn Chime on or off to meet your daily needs. To turn Chime on or off:

Press [#], [6].

The fixed-word keypad displays the current status of the chime feature.

– 21 –

Image 21

Contents OMNI-408EU Page Table Of Contents Quick Reference Quick Reference cont’d Keystroke Quick Command Keypads DescriptionInstant Stay Code IntroductionDescriptionkeys System ReferenceOMNI-KP,OMNI-KP-US and XK108 Keypads System Reference cont’dSystem Reference cont’d To Arm the System and Leave System OperationWhen the System is Not Ready System Operation cont’dTo Arm the System and Stay Inside To Arm the System In Instant Mode and Stay Inside To Bypass a Zone To Arm the System In Instant ModeTo Unbypass a Zone Fixed-Word Keypad Armed LED off Ready LED blinks Adding/Changing a User Code User CodesDeleting a User Code Code 3 ∗Paging Feature Follow-Me DisplaysChanging the Pager Follow-Me Phone Number Paging Feature cont’d Arm System Maid Code Miscellaneous CommandsBypass , Zone No Miscellaneous Commands cont’dSet Time and Date Testing the System Battery TestSystem Test Living Room Bedroom Recommendations on Smoke DetectorsEmergency Evacuation Radio Frequency Emissions Statements Telephone Operational Problems System Limitations System Limitations cont’d Glossary Glossary cont’d Glossary cont’d ÊN9942-2V2ÁŠ