Honeywell 408EU manual Glossary cont’d

Page 30

Glossary (cont’d)

CHIME FEATURE: An optional feature that causes the keypad to chime for 1 second when selected doors are opened when the burglary protection is off or disarmed. Once programmed by your installer, you can turn Chime on and off by pressing [#], [6].

DURESS: Duress is a system feature that you may have programmed into your system. If someone should force you to disarm your system, you would use the special Duress User Code. This code disarms the system and sends a silent duress emergency signal to the central station so personnel can respond appropriately.

ENTRY DELAY: The period of time allowed between opening a designated entry/exit door and disarming the alarm system before the system registers an alarm condition. This time is determined at the time of installation. Your system supports two entry times, allowing you to have a different length of time for different doors.

EXIT DELAY: The period of time allowed between arming the system and leaving through a designated exit/entry door. This is determined at the time of installation.

INTERIOR ZONE: A group of points that protects the interior of your premises. You may want to arm the perimeter portion of your system while leaving the interior zones disarmed, allowing you to move freely inside, opening interior doors and passing by motion detectors without causing an alarm.

KEYPAD: A keypad is your link to your system. It displays alarm and trouble messages, shows faulted zones, and allows you to arm and disarm the system by using the keys. Your system has one or more keypads.

ON/OFF: See ARMED/DISARMED

PANIC BUTTON: A pushbutton that allows you to signal the central station that you need immediate assistance. Your system has programmable Keypad Send Help Alerts that can also serve as Panic buttons. PERIMETER ZONE: A group of points that protects the exterior of your premises such as your outside doors and windows.

– 30 –

Image 30
Contents OMNI-408EU Page Table Of Contents Quick Reference Keystroke Quick Command Keypads Description Quick Reference cont’dIntroduction Instant Stay CodeSystem Reference DescriptionkeysSystem Reference cont’d OMNI-KP,OMNI-KP-US and XK108 KeypadsSystem Reference cont’d System Operation To Arm the System and LeaveWhen the System is Not Ready System Operation cont’dTo Arm the System and Stay Inside To Arm the System In Instant Mode and Stay Inside To Arm the System In Instant Mode To Bypass a ZoneTo Unbypass a Zone Fixed-Word Keypad Armed LED off Ready LED blinks Deleting a User Code User CodesAdding/Changing a User Code Code 3 ∗Paging Feature Follow-Me DisplaysChanging the Pager Follow-Me Phone Number Paging Feature cont’d Miscellaneous Commands Arm System Maid CodeMiscellaneous Commands cont’d Bypass , Zone NoSet Time and Date Testing the System Battery TestSystem Test Recommendations on Smoke Detectors Living Room BedroomEmergency Evacuation Radio Frequency Emissions Statements Telephone Operational Problems System Limitations System Limitations cont’d Glossary Glossary cont’d Glossary cont’d ÊN9942-2V2ÁŠ