Honeywell 800-08091V3 User System Setup contd, Wave Primary Controller Shift to Secondary icon

Page 31

User System Setup (cont'd)

LED Test

ICON

ACTION

NOTES

 

 

 

 

1. Press the LED Test icon; "Testing.." is displayed

At the conclusion of the test, a pop-up "Confirmation Window" displays:

 

 

 

 

 

 

 

 

while the 3 LEDs light sequentially, top to

"Did you see chasing LED pattern?"

 

 

 

 

 

 

 

 

bottom (red, green, yellow), 5 times.

If you press Yes, "Passed" is displayed in the test status column.

 

 

 

 

If you press No, "Failed" is displayed in the test status column.

 

 

 

 

 

Calibration

Test

 

ICON

 

ACTION

NOTES

 

 

 

 

1. Select the Calibration icon and using a stylus,

A pop-up message displays:

 

 

 

 

 

 

follow the

screen directions by pressing a

Touch screen calibration

 

 

 

 

 

 

 

series of crosshairs (+) and boxes (❏) on the

Touch crosshair to calibrate

 

 

 

 

If the Calibration test was successful, a confirmation screen appears stating:

 

 

 

 

screen until done.

 

 

 

 

“Congratulations Calibration Success”

 

 

 

 

2. If the test was successful, press OK; the screen

 

 

 

 

If the test was unsuccessful, an error message appears stating:

 

 

 

 

returns to the Keypad Test screen.

“Calibration failed, do you want to retry?” Retry, Ignore or Exit.

Z-Wave Test

NOTE: This procedure is for Z-Wave test purposes only.

Role shifting is the process of shifting primary and secondary controllers. The secondary controller becomes the primary controller with the ability to enroll Z-Wave devices. This is useful when the primary controller is in a fixed location and the Z- wave device is not easily accessible (but within Z-wave range). To perform the role shifting Z-Wave Test, do the following:

 

ICON

 

ACTION

NOTES

 

 

1.

Press the Advanced Setup icon.

Select from two main categories of tests:

 

 

 

 

 

 

2.

Enter your Authorized Code.

• Z-Wave Role Shifting: Primary to

 

 

 

 

 

 

 

3.

Press the Keypad Test icon.

Secondary and Secondary to Primary.

 

 

 

 

 

 

 

4.

With the status of the controller in the “P” (Primary) state, press the Z-

• Z-Wave Basic Command: Set On or

 

 

 

 

 

 

 

 

 

 

 

 

 

Wave Primary Controller Shift to Secondary icon.

Off.

 

 

 

 

 

 

 

 

A pop-up window is displayed with the following warning: “Warning!! This Z-

 

 

 

 

 

 

 

 

 

Wave controller shift function is for evaluation only now. This primary controller is

Note: The status of the controller can only

 

 

 

 

 

 

 

 

shifting to the secondary. Please wait until the process completes.

be changed from Primary to Secondary

 

 

 

 

 

 

 

 

5.

To shift the primary controller role to a handheld controller, follow the

 

 

 

 

controller when no devices are enrolled.

 

 

 

 

 

 

 

 

 

handheld controller manufacturer’s instructions.

Use the delete device or reset controller

 

 

 

 

 

 

 

 

 

The pop-up message disappears and controllers have shifted successfully.

function to remove enrolled devices.

 

 

 

 

 

 

 

 

 

Z-Wave devices can now be enrolled from this controller.

 

 

 

 

 

 

 

 

 

Note: The Z-Wave Primary Controller Shift to Secondary icon is inactive

 

 

 

 

 

 

 

 

 

when the Tuxedo Touch becomes the secondary controller.

 

 

 

 

 

 

 

 

 

The Shift is completed when the warning window disappears.

 

 

 

 

 

 

 

 

 

6. Shift the Tuxedo Touch back to the primary controller after enrolling Z-

 

 

 

 

 

 

 

 

 

wave devices. First, initiate the role shift on the handheld controller from

 

 

 

 

 

 

 

 

 

primary to secondary referring to manufacturer’s instructions. Then, press

 

 

 

 

 

 

 

 

 

the Z-Wave Secondary Controller Shift to Primary icon on the keypad.

 

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 800-08091V3 4/13 Rev. a Tuxedo Touch Serriieess Home Automation Systeemm User GuideTable of Contents MULTI-MEDIA User System Setup Introduction About the SystemNavigating through the Tuxedo Touch Keypad Weather Forecast About the System contdAbout Your Home Screen Multi-Media ApplicationNavigation Icon Descriptions Icon Function System TroublesLED Operation Safe ModeUser Codes Extended FunctionalityArming Exit Entry Perimeter Interior Mode Delay ArmedSecurity Introduction to Security System OperationHow to Arm Multiple Partitions How to Arm the SystemSecurity contd Press the Bypass Selected icon How to Display FaultsHow to Bypass Zones Display Faults iconHow to Disarm the System How to Clear Bypassed ZonesSystem as Ready to Arm Fire and Carbon Monoxide Alarm Operation How to Check the Status of Other PartitionsPress the Arm Multi-Partition icon Silencing and Clearing a Fire/Carbon Monoxide Alarm Case of Fire AlarmMore Choices How to Clear/Hide a Control Panel MessageAdvanced System Features Console Emulation ModeHow to Send Emergency Messages How to View the Event LogPanic or Medical Operating Modes SetupBrightness and Volume Control Audio Set up iconPress the Disp & Audio Setup icon Setup contdAdjust the Screen Timeouts Clean ScreenIP Setup Setup cont’dWeb Server/Hosting IP Setup icon Voice Messages Multi-MediaVideo Icons Video Audio SetupPicture Setup Multi-Media contdMulti-Media cont’d Camera SetupPicture Icons Setup Icons Camera Icons How to Add a User User SetupAuthority Levels How to Edit a User User Setup contdHow to Add an Existing User to a Second Keypad How to Delete a UserTo exit, press the safe mode bar and press Select Safe Mode and then press ApplyPress the OK icon Setting Current Time and Date Setting Daylight Savings TimeSetup icons Advanced Setup User System SetupSystem Information Wave Primary Controller Shift to Secondary icon User System Setup contdOutput Setup Icons Press the Z-Wave Enroll/ Add icon Enroll a Light, Switch or Outlet ModuleAutomation Enroll/Add Z-Wave DevicesPress the Z-Wave Enroll/Add icon Automation contdEnroll a Door Lock Enroll a Honeywell ThermostatEdit a Device Module Name Remove a Light, Switch or Outlet ModuleEditing Z-Wave Device Names Remove/Delete Z-Wave DevicesThermostat is removed Then press the Z-Wave Setup icon to displayAt the thermostat Follow the instructions in the thermostatScene Rules Scene SetupPress the Automation and Scene Setup icons Scene IconsScene Setup Options Create a Room Setting a Secondary Keypad ControllerRoom Setup icon Room Setup IconsDevice Removed Wave TroubleshootingUpdating Controllers Keypads with New or Removed devices Removing a Secondary Controller KeypadEdit Scenes Remote ServicesControlling Device Scenes created in Total Connect Scenes created in TuxedoControlling Automation Z-Wave Devices Remotely Door Locks Compatible DevicesImportant Notes Wireless RangeGlossary Industry Canada Class B Statement TWO Year Limited Warranty Ê800-08091V3RŠ

800-08091V3 specifications

The Honeywell 800-08091V3 is a state-of-the-art control panel component that is recognized for its outstanding performance in the realm of security and monitoring systems. Designed to enhance the capabilities of Honeywell’s powerhouse security solutions, this product boasts a variety of features and technological advancements that ensure reliability and efficiency in protecting both residential and commercial properties.

One of the primary features of the Honeywell 800-08091V3 is its intuitive user interface, which allows for seamless navigation and easy access to critical information. The panel is designed with usability in mind, providing users with a straightforward means to monitor their security systems. This emphasis on user experience extends to the programming and customization options available, enabling users to tailor settings according to their specific needs.

Technologically, the Honeywell 800-08091V3 employs advanced communication protocols that ensure rapid data transmission and connectivity. It supports both wired and wireless communication, enhancing its versatility in various installations. This feature is particularly crucial for businesses or homeowners looking to implement a robust security system without the limitations of traditional wiring methods.

The Honeywell 800-08091V3 is also compatible with a wide range of security devices, including sensors, alarms, and surveillance cameras. This compatibility allows for an integrated system that can centralize control and monitoring, significantly improving response times and situational awareness. Its ability to interface with additional Honeywell products provides users with the flexibility to expand their security solutions as needs change.

In terms of characteristics, the Honeywell 800-08091V3 is designed for durability and longevity. It features a rugged construction that withstands environmental factors, making it suitable for both indoor and outdoor installations. Moreover, its power management capabilities ensure that the system remains operational during power outages, providing continuous protection without interruption.

Overall, the Honeywell 800-08091V3 exemplifies a commitment to innovation in security technology. Its key features, like an easy-to-use interface, advanced communication capabilities, extensive compatibility with other security devices, and robust construction, make it an ideal choice for those seeking a reliable and efficient security solution. Whether for home use or larger commercial applications, the Honeywell 800-08091V3 stands out as a prime example of modern security technology, ensuring peace of mind for users everywhere.
Top Page Image Contents