Whirlpool WHES30, WHES20 manual Valve Drain Requirements

Page 10

Valve Drain Requirements

Use the flexible drain hose, that is included, measure and cut to the length needed. Flexible drain hose is not allowed in all localities (check your plumbing codes). If local codes do not allow use of a flexible drain hose, a rigid valve drain run must be used. Buy a compression fitting (1/4 NPT x 1/2 in. minimum tube) and 1/2” tubing from your local hardware store. Then plumb a rigid drain as needed (see Figure 3).

NOTE: Avoid long drain hose runs, or elevating the hose more than 8’ above the floor. Make the water softener valve drain as short and direct as possible.

		1/4” NPT thread
		Barbs for 3/8” I.D. tubing
		Hose clamp
		Drain hose
Clip	1/4” NPT thread
	barbs	Compression fitting 1/4 NPT x
	barbs	1/2” O.D. tube (not provided)
		1/2” O.D. tube (not provided)

1/2” outside diameter copper tube (not provided)

Cut barbs from valve drain elbow (pull clip and remove drain valve elbow from valve)

Figure 3

Image 10

Contents Model WHES20 Model WHES30 Table of Contents Water Softener Safety Before You StartInspect Shipment Do not return the water softener to storeWater Softener Dimensions Softening Cycle How a Water Softener WorksWater Conditioning Information Regeneration Cycle150 Installation Requirements Tools and Parts NeededLocation Requirements Air Gap RequirementsValve Drain Requirements Plan the Installation Inlet --- Outlet Plumbing OptionsInstall the Brine Tank Overflow Elbow InstallationTurn Off Water Supply Move the Water Softener into Place Assemble Inlet and Outlet Plumbing Connect Inlet and Outlet PlumbingInstall Salt Storage Tank Overflow Hose Install Valve Drain HoseTest for Leaks Add Water and Salt to the Salt Storage Tank Sanitize the Softener/Sanitize After ServicePlug in Water Softener Program the Water Softener -- Model WHES20 Set Time of DaySet Recharge Regeneration Time Set Water Hardness NumberStart a Recharge Program the Water Softener -- Model WHES30 SET Salt Level button DisplayHardness Number Recharge Customizing Features/Options -- Model WHES20‘‘Power---Outage Memory’’ Recharge TonightSalt Efficiency Recharge Scheduled Customizing Features/Options-- Model WHES30Set Salt Level Water Flow Indicator Clean / Clear Water Iron Removal Clean Feature MinutesMaximum Days Between Regenerations 12 or 24 Hour ClockRefilling With Salt Routine MaintenanceBreaking a Salt Bridge Cleaning the Nozzle and Venturi Troubleshooting Guide Problem Cause SolutionAutomatic Electronic Diagnostics Manual Advance Diagnostics --- Model WHES20Manual Advance Regeneration Check --- Model WHES20 Manual Advance Diagnostics --- Model WHES30 Manual Advance Regeneration Check --- Model WHES30 Performance Claims Product SpecificationsVariable Salt Dose Wiring Schematic WarrantySoftener Components Key Description Wear-strip Seal Cross-section View 12 11 Key Part Description

WHES30, WHES20 specifications

The Whirlpool WHES30 and WHES20 are innovative water softeners designed to enhance the quality of your home’s water supply. These models are engineered to effectively reduce hard water minerals such as calcium and magnesium, providing soft water that helps protect your plumbing and appliances from scale buildup while improving the efficiency of soap and detergent.

One of the standout features of the WHES30 and WHES20 is their capacity. The WHES30 has a higher capacity, making it suitable for larger households requiring consistent soft water for daily use. It can handle water hardness levels of up to 120 grains per gallon and is designed to accommodate up to 30,000 grains of hardness removal, ensuring that even in high-demand scenarios, families can rely on a consistent supply of softened water. In contrast, the WHES20 is ideal for smaller households or those with milder water hardness issues, capable of managing up to 20,000 grains.

Both models utilize a demand-initiated regeneration process, which is an energy-efficient technology that allows the systems to regenerate only when necessary. This not only saves water and salt but also extends the lifespan of the system. The softeners use a high-efficiency brining cycle, which reduces waste and enhances performance, ensuring that you have soft water available at all times.

The Whirlpool WHES series also features easy-to-use digital controls. This user-friendly interface enables homeowners to easily monitor and program the system settings according to their specific needs. Detailed diagnostic information is displayed, allowing users to track water usage and maintenance schedules efficiently.

Additionally, both water softeners come equipped with a two-in-one system design that incorporates a built-in brine tank, simplifying installation and saving valuable space in your home. The compact nature of these models ensures they can fit into various locations without taking up excessive room.

In terms of construction, the WHES30 and WHES20 are durable and designed for longevity. They are built with sturdy materials that resist corrosion and ensure reliable performance over the years. This commitment to quality makes these water softeners a valuable investment for any household.

Overall, the Whirlpool WHES30 and WHES20 models deliver user-friendly operation, efficient performance, and high-quality components, making them excellent choices for anyone looking to improve their water quality through effective softening technology.