Whirlpool WHES20, WHES30 manual Move the Water Softener into Place

Page 13

Move the Water Softener into Place

1.Move the water softener into installation position. Set it on a level surface. If needed, place the water softener on a section of plywood, a minimum of 3/4” thick. Then, shim under the plywood to level the water softener, see Figure 7.

IMPORTANT: Do not place shims directly under the salt storage tank. The weight of the tank, when full of water and salt, may cause the tank to fracture at the shim.

ShimPlywood

Figure 7 (if needed for leveling)

2.Visually check and remove any debris from the water softener valve inlet and outlet ports.

3.Remove and discard the yellow plug and make sure the turbine assembly spins freely in the “out” port of the valve.

4.If not already done, put a light coating of silicone grease or petroleum jelly on the bypass valve o-rings.

5.Push the bypass valve into the softener valve as far as it will go. Snap the two large holding clips into place, from the top down as shown in Figure 8.

IMPORTANT: Be sure the clips snap firmly into place so the single valve bypass will not pull out.

clip channel

Figure 8

correct assembly

clip

 

outside diameter of water

outside diameter of clip chan-

softener valve inlet and outlet

nel on single valve bypass

NOTE: Be sure all 3 tabs of the clip go through the matching holes on the water softener valve inlet or outlet, and fully into the channel on the single valve bypass.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model WHES20 Model WHES30 Table of Contents Before You Start Water Softener SafetyDo not return the water softener to store Inspect ShipmentWater Softener Dimensions Water Conditioning Information How a Water Softener WorksSoftening Cycle Regeneration Cycle150 Tools and Parts Needed Installation RequirementsAir Gap Requirements Location RequirementsValve Drain Requirements Inlet --- Outlet Plumbing Options Plan the InstallationInstall the Brine Tank Overflow Elbow InstallationTurn Off Water Supply Move the Water Softener into Place Connect Inlet and Outlet Plumbing Assemble Inlet and Outlet PlumbingInstall Salt Storage Tank Overflow Hose Install Valve Drain HoseTest for Leaks Add Water and Salt to the Salt Storage Tank Sanitize the Softener/Sanitize After ServicePlug in Water Softener Set Time of Day Program the Water Softener -- Model WHES20Set Recharge Regeneration Time Set Water Hardness NumberStart a Recharge SET Salt Level button Display Program the Water Softener -- Model WHES30Hardness Number ‘‘Power---Outage Memory’’ Customizing Features/Options -- Model WHES20Recharge Recharge TonightSalt Efficiency Recharge Scheduled Customizing Features/Options-- Model WHES30Set Salt Level Water Flow Indicator Clean Feature Minutes Clean / Clear Water Iron Removal12 or 24 Hour Clock Maximum Days Between RegenerationsRefilling With Salt Routine MaintenanceBreaking a Salt Bridge Cleaning the Nozzle and Venturi Problem Cause Solution Troubleshooting GuideManual Advance Diagnostics --- Model WHES20 Automatic Electronic DiagnosticsManual Advance Regeneration Check --- Model WHES20 Manual Advance Diagnostics --- Model WHES30 Manual Advance Regeneration Check --- Model WHES30 Performance Claims Product SpecificationsVariable Salt Dose Warranty Wiring SchematicSoftener Components Key Description Wear-strip Seal Cross-section View 12 11 Key Part Description

WHES30, WHES20 specifications

The Whirlpool WHES30 and WHES20 are innovative water softeners designed to enhance the quality of your home’s water supply. These models are engineered to effectively reduce hard water minerals such as calcium and magnesium, providing soft water that helps protect your plumbing and appliances from scale buildup while improving the efficiency of soap and detergent.

One of the standout features of the WHES30 and WHES20 is their capacity. The WHES30 has a higher capacity, making it suitable for larger households requiring consistent soft water for daily use. It can handle water hardness levels of up to 120 grains per gallon and is designed to accommodate up to 30,000 grains of hardness removal, ensuring that even in high-demand scenarios, families can rely on a consistent supply of softened water. In contrast, the WHES20 is ideal for smaller households or those with milder water hardness issues, capable of managing up to 20,000 grains.

Both models utilize a demand-initiated regeneration process, which is an energy-efficient technology that allows the systems to regenerate only when necessary. This not only saves water and salt but also extends the lifespan of the system. The softeners use a high-efficiency brining cycle, which reduces waste and enhances performance, ensuring that you have soft water available at all times.

The Whirlpool WHES series also features easy-to-use digital controls. This user-friendly interface enables homeowners to easily monitor and program the system settings according to their specific needs. Detailed diagnostic information is displayed, allowing users to track water usage and maintenance schedules efficiently.

Additionally, both water softeners come equipped with a two-in-one system design that incorporates a built-in brine tank, simplifying installation and saving valuable space in your home. The compact nature of these models ensures they can fit into various locations without taking up excessive room.

In terms of construction, the WHES30 and WHES20 are durable and designed for longevity. They are built with sturdy materials that resist corrosion and ensure reliable performance over the years. This commitment to quality makes these water softeners a valuable investment for any household.

Overall, the Whirlpool WHES30 and WHES20 models deliver user-friendly operation, efficient performance, and high-quality components, making them excellent choices for anyone looking to improve their water quality through effective softening technology.
Top Page Image Contents