Whirlpool WHES30, WHES20 manual Product Specifications, Performance Claims, Variable Salt Dose

Page 34

4.Press the RECHARGE button to move the softener into fast rinse. Again look for a fast drain flow. Allow the softener to rinse for a few minutes to flush out any brine that may remain in the resin tank from the brining cycle test.

5.To return the softener to service, press the RECHARGE button.

Product Specifications

 

WHES20

WHES30

 

 

 

Rated Service Flow Rate (gpm)

6.0

8.0

 

 

 

Amount of High Capacity Resin (cu ft)

.57

.82

 

 

 

Pressure Drop at Rated Service Flow (psig)

10

12

 

 

 

Water Supply Max. Hardness (gpg)

50

95

 

 

 

Water Supply Max. Clear Water Iron (ppm)

3

5

 

 

 

Water Pressure Limits (min./max. psi)

20 --- 125

20 --- 125

 

 

 

Min. --- Max. Water Temperature (˚F)

40 --- 120

40 --- 120

 

 

 

Min. Water Supply Flow Rate (gpm)

3

3

 

 

 

Max. Drain Flow Rate (gpm)

2.0

2.0

 

 

 

Salt storage capacity

175 lbs.

175 lbs.

 

 

 

Performance Claims

 

WHES20

WHES30

 

 

 

Rated Softening Capacity

8,700 @ 1.7 lbs.

14,700 @ 2.9 lbs.

(Grains @ Salt Dose)

16,800 @ 5.4 lbs.

25,400 @ 8.0 lbs.

 

20,100 @ 9.1 lbs.

30,100 @ 13.1 lbs.

 

 

 

Rated Efficiency (Grains/Pound of Salt @

5000 @1.7 lbs.

5,000 @2.9 lbs.

Minimum Salt Dose)

 

 

 

 

 

These systems conform to NSF/ANSI 44 for the specific performance claims as verified and substantiated by test data.

The efficiency rating is only valid at the stated salt dose. These softeners were efficiency rated according to NSF/ANSI Standard 44.

Variable Salt Dose

The salt dose is selected by the electronic controls at regeneration time based on the amount needed.

34

Image 34
Contents Model WHES20 Model WHES30 Table of Contents Water Softener Safety Before You StartInspect Shipment Do not return the water softener to storeWater Softener Dimensions Softening Cycle How a Water Softener WorksWater Conditioning Information Regeneration Cycle150 Installation Requirements Tools and Parts NeededLocation Requirements Air Gap RequirementsValve Drain Requirements Plan the Installation Inlet --- Outlet Plumbing OptionsInstall the Brine Tank Overflow Elbow InstallationTurn Off Water Supply Move the Water Softener into Place Assemble Inlet and Outlet Plumbing Connect Inlet and Outlet PlumbingInstall Salt Storage Tank Overflow Hose Install Valve Drain HoseTest for Leaks Add Water and Salt to the Salt Storage Tank Sanitize the Softener/Sanitize After ServicePlug in Water Softener Program the Water Softener -- Model WHES20 Set Time of DaySet Recharge Regeneration Time Set Water Hardness NumberStart a Recharge Program the Water Softener -- Model WHES30 SET Salt Level button DisplayHardness Number Recharge Customizing Features/Options -- Model WHES20‘‘Power---Outage Memory’’ Recharge TonightSalt Efficiency Recharge Scheduled Customizing Features/Options-- Model WHES30Set Salt Level Water Flow Indicator Clean / Clear Water Iron Removal Clean Feature MinutesMaximum Days Between Regenerations 12 or 24 Hour ClockRefilling With Salt Routine MaintenanceBreaking a Salt Bridge Cleaning the Nozzle and Venturi Troubleshooting Guide Problem Cause SolutionAutomatic Electronic Diagnostics Manual Advance Diagnostics --- Model WHES20Manual Advance Regeneration Check --- Model WHES20 Manual Advance Diagnostics --- Model WHES30 Manual Advance Regeneration Check --- Model WHES30 Performance Claims Product SpecificationsVariable Salt Dose Wiring Schematic WarrantySoftener Components Key Description Wear-strip Seal Cross-section View 12 11 Key Part Description

WHES30, WHES20 specifications

The Whirlpool WHES30 and WHES20 are innovative water softeners designed to enhance the quality of your home’s water supply. These models are engineered to effectively reduce hard water minerals such as calcium and magnesium, providing soft water that helps protect your plumbing and appliances from scale buildup while improving the efficiency of soap and detergent.

One of the standout features of the WHES30 and WHES20 is their capacity. The WHES30 has a higher capacity, making it suitable for larger households requiring consistent soft water for daily use. It can handle water hardness levels of up to 120 grains per gallon and is designed to accommodate up to 30,000 grains of hardness removal, ensuring that even in high-demand scenarios, families can rely on a consistent supply of softened water. In contrast, the WHES20 is ideal for smaller households or those with milder water hardness issues, capable of managing up to 20,000 grains.

Both models utilize a demand-initiated regeneration process, which is an energy-efficient technology that allows the systems to regenerate only when necessary. This not only saves water and salt but also extends the lifespan of the system. The softeners use a high-efficiency brining cycle, which reduces waste and enhances performance, ensuring that you have soft water available at all times.

The Whirlpool WHES series also features easy-to-use digital controls. This user-friendly interface enables homeowners to easily monitor and program the system settings according to their specific needs. Detailed diagnostic information is displayed, allowing users to track water usage and maintenance schedules efficiently.

Additionally, both water softeners come equipped with a two-in-one system design that incorporates a built-in brine tank, simplifying installation and saving valuable space in your home. The compact nature of these models ensures they can fit into various locations without taking up excessive room.

In terms of construction, the WHES30 and WHES20 are durable and designed for longevity. They are built with sturdy materials that resist corrosion and ensure reliable performance over the years. This commitment to quality makes these water softeners a valuable investment for any household.

Overall, the Whirlpool WHES30 and WHES20 models deliver user-friendly operation, efficient performance, and high-quality components, making them excellent choices for anyone looking to improve their water quality through effective softening technology.