For Your Safety

PLEASE READ THIS MANUAL CAREFULLY AND FOLLOW IT EXACTLY FOR YOUR SAFETY.

1.Follow all local codes, or in the absence of local codes, follow the most recent edition of the National Fuel Gas Code, ANSI Z223.1/NFPA 54 in USA or the CGA standard, CAN/CGA B149.1 or .2 Installation Codes for Gas Burning Appliances in Canada.

2.Properly ground the unit in accordance with all local codes, or in the absence of local codes, with the National Electrical Codes, ANSI/NFPA 70 in the USA or CSA standard C22.1 Canada Electrical Code Part 1 in Canada.

3.Carefully plan where to install your Flash Water Heater. Insure that your heater will have enough combustible air, proper ventilation, and locate your heater where water leakage will not do damage to surrounding areas. If there is a possibility of water damage, install a suitable drain pan under the unit, which will not restrict combustible airflow.

4.Check the rating plate for the correct gas type, gas pressure, water pressure, and electrical rating. Do not install this unit if these requirements can’t be met.

5.If a problem should occur, turn off all hot water taps and turn off the gas. Call a trained technician, the Gas Company, or the manufacturer.

6.WARNING: Do not disconnect the electrical supply if the temperatures will be near freezing. The Freeze Prevention Device will only work if the unit has proper electrical power. The Freeze Prevention Device is rated for temperatures down to 5º F (-15º C) in a wind free environment. The wind chill factor will cause the Flash Water Heater to freeze and be damaged at temperatures above 5º F (-15º C). Refer to the sections on Winterizing and the Freeze Prevention Device for more information.

7.WARNING: Before bathing or showering always check the water temperature. Do not leave children or the infirm unsupervised in the shower or bath. The water temperature is set at 120º F (50º C) from the factory to maximize the amount of hot water you can use. Water temperature over 125º F can cause severe burns instantly or death from scalds.

8.WARNING: Do not use this appliance if any part has been underwater. Immediately call a certified and trained technician to inspect and service the unit if necessary.

9.WARNING: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

10.WARNING: Do not reverse the water and gas connections, this will damage your heater and can cause severe injury or death from scalds. Follow the diagram below when installing your Flash water heater.

T-K1S specifications

The Whirlpool T-K1S is a cutting-edge tankless water heater designed to provide endless hot water while maximizing energy efficiency. This model is part of Whirlpool's commitment to innovative technology and superior performance, making it a popular choice for both residential and commercial applications.

One of the standout features of the T-K1S is its on-demand heating capability. Unlike traditional water heaters that store hot water in a tank, the T-K1S heats water only when needed. This eliminates the need for a storage tank and reduces the risk of running out of hot water during peak usage times. Homeowners can enjoy continuous hot water, making it ideal for multiple simultaneous uses such as showers, dishwashing, and laundry.

The T-K1S is equipped with advanced technology that optimizes energy use. With its high-efficiency rating, it significantly reduces energy consumption compared to conventional water heaters. The built-in digital scale allows users to set precise temperatures, ensuring comfort while also promoting energy conservation. This feature also helps to minimize the carbon footprint, making the appliance an eco-friendly option.

Safety is a paramount consideration in the design of the T-K1S. It features multiple safety mechanisms, including a robust thermal control system that prevents overheating. The unit also has a built-in safety shut-off mechanism which activates in the event of water flow disruptions, ensuring peace of mind for users.

Another noteworthy characteristic of the T-K1S is its compact design. The space-saving design offers flexibility in installation, allowing it to fit in small or tight spaces, such as utility rooms, basements, or even closets. This feature is especially beneficial for those with limited room for traditional, bulky water heating systems.

Durability is another key aspect of the Whirlpool T-K1S. Constructed with high-quality materials, it is designed to withstand the test of time, minimizing the need for repairs or replacements. Whirlpool also offers excellent warranty options for added security on your investment.

In summary, the Whirlpool T-K1S is an exceptional tankless water heater that combines efficiency, safety, and durability. With its on-demand heating technology, energy-saving features, and compact design, it represents a smart choice for anyone looking to enhance their hot water supply while being environmentally conscious. It embodies Whirlpool's commitment to quality and performance, making it a leading option in the market.