Whirlpool T-K1S installation manual Indoor Installation, Combustible Air Supply

Page 11

WARNING: United States regulations forbid installing the unit within 4’ of any opening into any building. Similar Canadian regulations forbid the unit from being installed within 10’ of any opening into any building.

WARNING: Improper installation can cause nausea or asphyxiation from carbon monoxide and flue gases which could result in severe injury or death. For installation in altitudes above 4,500 feet, contact the manufacturer for instructions.

Indoor Installation

Follow all local codes, or in the absence of local codes, follow the codes for Installation of Gas Burning Appliances; National Fuel Gas Code ANSI Z221.23 in USA or CAN/CGA B149.1 or .2 in Canada.

WARNING: In an indoor installation, the T-K1S must be connected to a Category III special gas vent in order to direct the dangerous exhaust byproducts to the outdoors. Connect the 4” Category III vent pipe to the 4” round collar on the top of the unit.

WARNING: Do not install the unit directly on a combustible surface such as carpeting, wood

10

floors, etc. If it is necessary to install the unit standing on a surface, install a 3” noncombustible base between the unit and the surface.

Combustible Air Supply

The T-K1S must be installed in a location where the proper amount of combustible air will be available to it at all times. If the unit is installed in a confined space, there must be permanent openings supplying air to the unit.

If the openings will bring air directly from the outdoors, two openings are required, and they should be sized to give a minimum free area of one square inch for every 4000 BTUH of the maximum input rating of the unit.

If the openings will bring air from another indoor area, they should be sized to give a minimum free area of one square inch for every 1000 BTUH of the maximum input rating of the unit. One of these openings should be within 12” of the ceiling, and the other should be within 12” of the floor.

Image 11
Contents Flash Water Heater Model T-K1S K1SInstantaneous Water HeaterSpecifications Table of ContentsFor Your Safety Turning It Off TemperatureOperation General Turning It OnFreeze Prevention Electrical Connections InstallationWiring Diagram Propane Supply Piping Gas Supply PipingNatural Gas Supply Piping Pressure Relief Valve Water PlumbingOutdoor Installation Wall Hanging InstallationStanding Installation Combustible Air Supply Indoor InstallationExhaust Venting Manufactured Home Mobile Home InstallationIndoor Installation Outdoor InstallationInitial Operation Initiating the ApplianceSpace Heating Application Dual-purpose hot water heating Domestic and Space Heating Recirculation ApplicationsK1S with Storage Tank For Your Safety Read Before Operating Page It Takes Too Long to Get Hot Water TroubleshootingMaintenance Water Isn’t Hot EnoughComputer Board Error CodesOptional Items TKRE01emperature Remote Controller TK-TV03 Vent DamperCase Heat Exchanger Manifold Burner Computer K1S Parts List Page 254

T-K1S specifications

The Whirlpool T-K1S is a cutting-edge tankless water heater designed to provide endless hot water while maximizing energy efficiency. This model is part of Whirlpool's commitment to innovative technology and superior performance, making it a popular choice for both residential and commercial applications.

One of the standout features of the T-K1S is its on-demand heating capability. Unlike traditional water heaters that store hot water in a tank, the T-K1S heats water only when needed. This eliminates the need for a storage tank and reduces the risk of running out of hot water during peak usage times. Homeowners can enjoy continuous hot water, making it ideal for multiple simultaneous uses such as showers, dishwashing, and laundry.

The T-K1S is equipped with advanced technology that optimizes energy use. With its high-efficiency rating, it significantly reduces energy consumption compared to conventional water heaters. The built-in digital scale allows users to set precise temperatures, ensuring comfort while also promoting energy conservation. This feature also helps to minimize the carbon footprint, making the appliance an eco-friendly option.

Safety is a paramount consideration in the design of the T-K1S. It features multiple safety mechanisms, including a robust thermal control system that prevents overheating. The unit also has a built-in safety shut-off mechanism which activates in the event of water flow disruptions, ensuring peace of mind for users.

Another noteworthy characteristic of the T-K1S is its compact design. The space-saving design offers flexibility in installation, allowing it to fit in small or tight spaces, such as utility rooms, basements, or even closets. This feature is especially beneficial for those with limited room for traditional, bulky water heating systems.

Durability is another key aspect of the Whirlpool T-K1S. Constructed with high-quality materials, it is designed to withstand the test of time, minimizing the need for repairs or replacements. Whirlpool also offers excellent warranty options for added security on your investment.

In summary, the Whirlpool T-K1S is an exceptional tankless water heater that combines efficiency, safety, and durability. With its on-demand heating technology, energy-saving features, and compact design, it represents a smart choice for anyone looking to enhance their hot water supply while being environmentally conscious. It embodies Whirlpool's commitment to quality and performance, making it a leading option in the market.