Xerox 1075 Installing the PostScript 3 Printer Driver, Installing the printer driver, Reference

Installing the PostScript 3 Printer Driver

Installing the PostScript 3 Printer Driver

This section describes basic instructions for installing the PostScript 3 printer driver. Actual procedures may differ depending on the operating system. Fol- low the procedures below as appropriate.

Reference	2
To use the PostScript 3 printer driver, the optional PostScript 3 Board must be

installed on the machine. See the PostScript 3 Board Type 1075 Operating In- structions Supplement for details.

Important

❒When updating to the latest version of the printer driver, you should unin- stall any earlier versions. See “Uninstalling the Printer Driver”, Printer Refer- ence 2.

Windows 95/98/Me - Installing the PostScript 3 Printer Driver

Installing the printer driver

A Close all applications that are running.

B Insert the CD-ROM into the CD-ROM drive.

Auto Run will start the installer.

C Select a language for the interface language, and then click [OK].

The following languages are available: Cestina (Czech), Dansk (Danish), Deutsch (German), English (English), Espanol (Spanish), Francais (French), Italiano (Italian), Magyar (Hungarian), Nederlands (Dutch), Norsk (Norwe- gian), Polski (Polish), Portugues (Portuguese), Suomi (Finnish), Svenska (Swedish)

The default interface language is English.

Note

❒The printer driver with the selected language will be installed.

❒The printer driver will be installed in English if you select the following languages: Cestina, Magyar, Polski, Portugues and Suomi.

D Select [PostScript 3 Printer Driver]. [Add Printer Wizard] starts.

E Click [Next].

F Check [Local Printer], and then click [Next].

A dialog box for selecting the printer appears.

31