Xerox 1075 manual Installing the Printer Driver and Software, Installation Method, Reference

2.Installing the Printer Driver and Software

This manual assumes that you are familiar with general Windows procedures and practices. If you are not, see the documentation that comes with Windows for details.

Installation Method

❖Installing using Auto Run

Inserting the CD-ROM into the CD-ROM drive starts the installer automati- cally. The installer helps you install the following printer drivers and soft- ware easily.

The following table shows the printer drivers and software that can be in- stalled using Auto Run.

		Auto Run *1
	Quick Install		Add Printer and
			Utility Wizard
	Network connection	Parallel connection
	with TCP/IP
PCL 6 printer driver	❍	❍	❍
PCL 5e printer driver			❍
RPCS™ printer driver	❍	❍	❍
PostScript 3 printer			❍
driver
Agfa Monotype Font			❍
Manager 2000
SmartNetMonitor for			❍
Admin
SmartNetMonitor for	❍		❍
Client

*1 Available operating systems are as follows: Windows 95/98/Me, Windows 2000/XP, Windows NT 4.0. Auto Run is unavailable with Macintosh.

Reference

When the machine is connected to the computer using the IEEE 1394 inter- face or the USB2.0 interface, install the printer drivers separately.

⇒p.43 “Installing the Printer Driver Using USB”

⇒p.46 “Installing the Printer Driver Using IEEE 1394”

21