|
| Installing the Printer Driver and Software |
|
| Quick Install |
|
| Auto Run will start the installer automatically when you load the |
|
| the |
|
| printer driver and the RPCS™ printer driver. The SmartNetMonitor for Client |
|
| can also be installed provided the machine and the computer are connected via |
|
| the network. |
2 |
| |
| The following conditions are required: | |
|
| |
|
| • Windows 95/98/Me, Windows 2000/XP or Windows NT 4.0 |
|
| For Ethernet connections: |
|
| • The machine must be connected to the network using an Ethernet cable. |
|
| • TCP/IP protocol must be configured. |
|
| • The IP address must be assigned to both machine and computer. |
|
| For parallel connections: |
|
| • The machine must be connected to the computer using a parallel cable. |
|
| • Bidirectional transmission must be enabled. |
Limitation
❒If your operating system is Windows 2000/XP or Windows NT 4.0, installing a printer driver using Auto Run requires Administrators permission. When you install a printer driver using Auto Run, log on using an account that has Administrators permission.
❒When the machine is connected to the computer using the IEEE 1394 interface or the USB2.0 interface, Quick Install cannot be used. See p.43 “Installing the Printer Driver Using USB”, p.46 “Installing the Printer Driver Using IEEE 1394”.
Important
❒If your system is Windows NT 4.0, we recommend that you upgrade the Win- dows NT 4.0 operating system to Service Pack 4 or later before installing the PCL 6/5e or RPCS™ printer drivers. Contact your Windows retailer for more information about the latest version available.
Note
❒If you want to cancel Auto Run, hold down the {SHIFT} key (when your op- erating system is Windows 2000/XP, hold down the left {SHIFT} key) while inserting the
A Close all applications that are running.
B Insert the
Auto Run will start the installer.
24
