Initiating the Appliance, Initial Operation

Initiating the Appliance

For your safety, read before operating.

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

a)This appliance does not have a pilot. It is equipped with an electronic ignition device, which automatically lights the burner. Do not try to light the burner by hand.

b)Before operating, check for gas accumulation in the area around the appliance. Pay special attention near the floor, because gas is often heavier than air, and it may accumulate near the floor.

c)Do not attempt to open the manual gas shutoff valve with anything but by hand. Never use tools. If the valve will not open by hand, do not try to repair it. Instead, call a qualified service technician. Force or attempted repair may result in a gas leak, fire or explosion.

d)Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part that may have been damaged by being under water.

WARNING: IF YOU SMELL GAS:

•Do not use any appliance.

•Do not touch any electric switch, do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire department.

Initial Operation

1.STOP! Do not operate without reading the safety information first!

2.Switch off the electrical power supply to the heater.

3.Do not attempt to light the burner manually.

4.Turn the manual gas control valve located on the outside of the unit counterclockwise to the OFF position.

5.Wait five (5) minutes to clear out any gas. If you then smell gas, STOP! Follow “b” in the “Initiating the Appliance” section above. If you do not detect gas, proceed to the next step.

6.Turn the manual gas control valve located on the outside of the unit clockwise to the ON position.

7.Turn on the electrical power to the appliance.

8.Turn on any tap, and the T-K1S will initiate itself.

9.If the appliance will not operate, follow the instructions in the “Turning Off the Gas Supply to the Appliance” section following, and call a service technician or gas supplier.

TURNING OFF THE GAS SUPPLY TO THE APPLIANCE

Close the manual valve on the gas inlet line. Turn off the power supply.

Manifold pressure tap.

T-K1S specifications

The Whirlpool T-K1S is a cutting-edge tankless water heater designed to provide endless hot water while maximizing energy efficiency. This model is part of Whirlpool's commitment to innovative technology and superior performance, making it a popular choice for both residential and commercial applications.

One of the standout features of the T-K1S is its on-demand heating capability. Unlike traditional water heaters that store hot water in a tank, the T-K1S heats water only when needed. This eliminates the need for a storage tank and reduces the risk of running out of hot water during peak usage times. Homeowners can enjoy continuous hot water, making it ideal for multiple simultaneous uses such as showers, dishwashing, and laundry.

The T-K1S is equipped with advanced technology that optimizes energy use. With its high-efficiency rating, it significantly reduces energy consumption compared to conventional water heaters. The built-in digital scale allows users to set precise temperatures, ensuring comfort while also promoting energy conservation. This feature also helps to minimize the carbon footprint, making the appliance an eco-friendly option.

Safety is a paramount consideration in the design of the T-K1S. It features multiple safety mechanisms, including a robust thermal control system that prevents overheating. The unit also has a built-in safety shut-off mechanism which activates in the event of water flow disruptions, ensuring peace of mind for users.

Another noteworthy characteristic of the T-K1S is its compact design. The space-saving design offers flexibility in installation, allowing it to fit in small or tight spaces, such as utility rooms, basements, or even closets. This feature is especially beneficial for those with limited room for traditional, bulky water heating systems.

Durability is another key aspect of the Whirlpool T-K1S. Constructed with high-quality materials, it is designed to withstand the test of time, minimizing the need for repairs or replacements. Whirlpool also offers excellent warranty options for added security on your investment.

In summary, the Whirlpool T-K1S is an exceptional tankless water heater that combines efficiency, safety, and durability. With its on-demand heating technology, energy-saving features, and compact design, it represents a smart choice for anyone looking to enhance their hot water supply while being environmentally conscious. It embodies Whirlpool's commitment to quality and performance, making it a leading option in the market.