Operation General, Turning It On, Turning It Off

Operation

General

The Flash Water Heater is an instantaneous, tankless water heater designed to efficiently supply domestic or commercial hot water. The principle behind the Flash water heater is simple: Once a hot water tap is opened, the Flash’s flow sensor detects that hot water is needed, and automatically commands the computer to electronically ignite the burners, and heat water. During operation, the computer monitors the water temperature and flow rate, and controls the gas flow and fan speed to maintain a constant output temperature. After the burners are ignited the “fire on” lamp will be lit.

0.75gallons per minute is required to turn the burners on, but after the burners are ignited, the flow rate can drop to 0.60 gallons per minute without the burners turning off.

As long as water, gas and electricity are connected, there will be an endless flow of hot water. To turn on your water heater, just open a tap. To turn the heater off, just close the tap.

Turning It On

To turn on the Flash water heater

1.Open a hot water tap, or turn on water demanding appliance.

2.Unit will detect flow, burners will ignite, “Fire On” lamp will light up on the computer.

3.If necessary, mix in cold water to get a comfortable temperature.

Turning It Off

To turn off the Flash water heater

1.Close the hot water tap, or turn appliance off.

2.Flow will diminish, unit will shut off.

3.“Fire On” lamp will go out.

Temperature

The output temperature of the T-K1S has been factory set for a maximum 120° F (50° C). This is electronically controlled by the computer and can be adjusted with a TK-RE01 temperature controller. Further adjustment may be made by mixing in cold water with the hot to obtain the ideal water temperature.

The flow rate possible out of the unit is dependent on the temperature setting chosen. Consult the flow charts on the last page of this unit to determine the possible outlet temperature and flow rate combinations.

WARNING: Temperatures above 125º F (52º C) can cause severe burns or death from scalding. Children, the disabled and the elderly are at a high risk of being injured. Feel the water temperature before bathing or showering. Do not leave children, disabled persons, or the elderly unsupervised.

Flow

The flow rate through the T-K1S is limited to a maximum of 7.5 GPM. The temperature setting, along with the supply temperature of the water will determine the flow rate the unit puts out. Consult

T-K1S specifications

The Whirlpool T-K1S is a cutting-edge tankless water heater designed to provide endless hot water while maximizing energy efficiency. This model is part of Whirlpool's commitment to innovative technology and superior performance, making it a popular choice for both residential and commercial applications.

One of the standout features of the T-K1S is its on-demand heating capability. Unlike traditional water heaters that store hot water in a tank, the T-K1S heats water only when needed. This eliminates the need for a storage tank and reduces the risk of running out of hot water during peak usage times. Homeowners can enjoy continuous hot water, making it ideal for multiple simultaneous uses such as showers, dishwashing, and laundry.

The T-K1S is equipped with advanced technology that optimizes energy use. With its high-efficiency rating, it significantly reduces energy consumption compared to conventional water heaters. The built-in digital scale allows users to set precise temperatures, ensuring comfort while also promoting energy conservation. This feature also helps to minimize the carbon footprint, making the appliance an eco-friendly option.

Safety is a paramount consideration in the design of the T-K1S. It features multiple safety mechanisms, including a robust thermal control system that prevents overheating. The unit also has a built-in safety shut-off mechanism which activates in the event of water flow disruptions, ensuring peace of mind for users.

Another noteworthy characteristic of the T-K1S is its compact design. The space-saving design offers flexibility in installation, allowing it to fit in small or tight spaces, such as utility rooms, basements, or even closets. This feature is especially beneficial for those with limited room for traditional, bulky water heating systems.

Durability is another key aspect of the Whirlpool T-K1S. Constructed with high-quality materials, it is designed to withstand the test of time, minimizing the need for repairs or replacements. Whirlpool also offers excellent warranty options for added security on your investment.

In summary, the Whirlpool T-K1S is an exceptional tankless water heater that combines efficiency, safety, and durability. With its on-demand heating technology, energy-saving features, and compact design, it represents a smart choice for anyone looking to enhance their hot water supply while being environmentally conscious. It embodies Whirlpool's commitment to quality and performance, making it a leading option in the market.