14 | Logitech® |
|
|
5.Next you’ll see the Wireless Connection screen, where you can choose to “Connect using Squeezebox” or “Connect using other wireless network”. Since you will be using the hybrid installation, you should select “Connect using other wireless network.”
6.You’ll see the Wireless Networks screen, listing the available wireless networks. Scroll to your network and press CENTER to select it.
Note: If your router is configured not to broadcast its network name, also known as the SSID, you won’t see it on the list. You can connect to it by selecting “Other network” and entering the network name by hand.
Note: If you are certain your network name is broadcast but it isn’t appearing in the list, you may be out of range. If moving closer doesn’t correct the problem,
7.If your wireless network is secured, Squeezebox Controller will try to determine the type of security used. If the Controller can’t determine the type of encryption used, you will be asked to select it from a list. Once the encryption is determined, you’ll be asked to enter your security key using the SCROLL WHEEL to highlight a letter or number and the CENTER button to select it.
8.If your encryption key was entered correctly, Squeezebox Controller will connect to your network and will display a Connected screen. If you made a mistake, press the BACK button and
Note: If are unable to connect to your network, please refer to the “Troubleshooting” section in this User Guide for additional help. Technical Support contact information can be found at the beginning of this User Guide.
Set Up Squeezebox Receiver
Once Squeezebox Controller has successfully connected to your network, you’ll be able to set up your Squeezebox Receiver.
1.Select your Squeezebox Receiver from the list. It will appear on the display as “Squeezebox XXXXXX” where XXXXXX is the last six digits of the player’s MAC address (its unique network identifier).