Alternate window jamb applications

15.Slide the inner window each firmly against the side of the cabinet. Make sure not to peel the seal strips from the window track and cabinet side channels. If the panel frame does not fit snugly to the inner window sash, secure the panel frame to the sash with #8 x %-inch wood screws or #8- 32 x %-inch self-threading screws. Use the partially plugged holes in the panel frame. For metal or plastic window sashes or jambs, drill H-inch pilot holes for the self- threading screws.

NOTE: When installing screws in the window sash, be sure not to interfere with the glass inside the sash retaining channel.

16.Hook the safety bracket over the base of the unft and fasten it to the front of the platform assembly. Use a #8-32 x %-inch self-threading screw.

NOTE: The bracket prevents movement of the air conditioner (either in or out) after completing the installation.

17.Stuff the foam aeal l trip/aaah real between the vertical sash and the window glass.

16.UK the window locking brmket to lock the inner window sash to the base of the outer window sash. Use one It8 x %-inch wood screw or #8-32 x %-inch self-threading screw. (See illustration.)

19.Replete the air conditioner front panel frame and air intake panel. Make sure you replace the 2 screws that hold the front panel frame in place before you replace the air intake panel.

6lids inm window Bmoh lirmly wnst

Cdhld

InrW ufoty braket

To install in windows having no flanges or wood stops on the top and side jambs, the channels and panel frame must fit against a mating flange (or l&inch max. thick angle) attached to the window jambs. Figure A shows this angle installed. Figures B CLC show alternate treat- ments. On the sash side of the opening, the leading comer of the inner sash becomes the flange. You can purchase the angle strip locally.

A		C
AddM*to	Add16-	or la-
-stop	wge	we