Whirlpool ACSIOZ ACS520 Preparing for installation, Electrical, connection, Installation tips

Electrical	connection
Electrical ground is required on this appliance.
Recommended	groundlng method
For your personal safety, this appliance must bs		Poww

grounded. This air conditioner is equipped with a power supply cord with a 3prong grounding plug. To minimize possible electrical shock hazard, the cord must be plugged into a mating 3prong grounding-type wall receptacle, grounded in accordance with the National Electrical Code (ANSI/NFPA 70-latest version) and all local codes and ordinances. If a mating 3-prong groundingtype wall receptacle is not available, it is the responsibilii of the consumer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

Preparing for installation

Installation tips

For wood-frame cnement windowe: It may be necessary to construct a frame, using at least

1-inch thick wood, with a 15%inch wide opening. Fasten frame securely and seal it into the window opening.

For brick or cement bulkflng conetruction: It may be necessary to provide a wood stool strip under the air conditioner for mounting purposes.

Tools required

lFlat-head screwdriver

l Phillips-head screwdriver l Carpenter’s level

lTape measure l Fine tooth saw

l Electric or hand drill l %-inch drill bit

l %-inch drill bit

Pereonel Injury and

Product Damage Hazard

lBecause this air conditioner weighs about 88 to 105 pounds, it is recommended that you have someone help you when you install your new unit and that you both use proper lifting techniques.

l This appliance must be installed according to all applicable codes and ordinances.

lHandle the air conditioner with care. Watch out for the sharp metal fins on the front and rear coils.

lBe sure your air conditioner does not fall during installation.

lDo not use the water collected in the unit for drinking purposes. lt is not sanitary.

Failure to follow the above precautions could resull in personal injury or product damage.