Whirlpool ACSIOZ ACS520 warranty Understanding normal operating sounds, Saving energy

Page 23
Understanding normal operating sounds

Understanding normal operating sounds

When your air conditioner is operating normally, you will hear sounds such as:

l

l

l

Droplets of water hitting the condenser, causing a “pinging’or “clicking”sound. Water droplets help to cool the condenser.

Air movement from the fan, especially on high fan speed settings.

Clicks from the thermostat cycle.

Sounds also may be caused by house construc- tiorwruch as vibration of the unit due to wall construction or unsteady window mounting area.

Saving energy

You can help save energy by following the tips below.

l

l

l

l

l

l

Improve your home’s insulation. Seal all doors and windows. Close the fireplace flue.

Close all blinds and drapes on sunny sides of the house. Add window awnings.

Keep the air filter clean.

Do not block the airflow with drapes or furniture.

Ventilate the attic. High temperatures in the attic add to the air conditioner’s cooling load.

Try not to use heat-producing appliances during the hottest part of the day.

lTurn off lights and appliances when they are not needed.

lKeep heat registers and cool-air returns closed.

lUse exhaust venting fans when cooking, doing laundry or bathing.

23

Image 23
Contents lnstakrtion ANoteToYw IFZZ? Parts And Featuresc&i&F&~ If You Need $$$=F~ Warranty UseAndCareis toll-free,24 hours a day Your safety is important to usA Note To You Thank you for buying a WhirlpooP applianceHelp us help you Important safety instructionsCOIIBOICOlltTOl PartsAnd FeaturesROIlbOVdO air lilb In This Installing Your Air CondiiionerReceptacle wiring Meeting electrical requirementsconnection Preparing for installationInstallation tips ElectricalIn~tdatkm kit contenta APlatform height Installing in a sliding windowl 40 inches maximum height 20’KI illchaAlternate screw bc8Uon PI&form IMina on atool bb Proper Dammge HazardOutside odgo l.Preudown Alternate window jamb applications window Installing in a casementFeeten eiding NOTE Do not push or pull on the air direction louvers 13.Drill two %-inchdiameter pilot holee in the top window jamb in line with the partially plugged holes in the panel frame. Secure the panel frame to the window jamb wfth two #8-32x %-inch self-threadingscrews. lf additional holding is necessary, two screws may be used on the sides of the panel frame as well In This Section PmPW Operating Your Air ConditionerStarting your air conditioner Cooling at low outside temperatures Using the exhaust vent controlAdjusting the air direction louvers In This Cleaning the air intake panelCaring For Your ConditionerPerforming annual maintenance Cleaning the air filter1.Unplug the power cord Saving energy Understanding normal operating soundsservice If You Need Assistance Or1. Before calling for assistance 4.If you need FSP replace- ment parts 3.If you need service2. lf you need assistance Room Air Conditioner Warranty vvHlF?LPooc