OperatingInstructions

Startingyourair conditioner

Flre Hazard

Do not use an extenslon cord.

Dolng so can result In death, fire, or electrical shock.

Electrical Shock Hazard

Plug Into a grounded three prong outlet. Do not remove ground prong.

Do not use an adapter.

Do not fuse neutral or grounding clrcult.

Do not use alr condltloner wlth front panel removed.

Failure to follow these lnstructlons can result In death, electrlcal shock, or serious Injury.

1.Set Exhaust Control to CLOSED for maxi- mum cooling results.

2.Set Fan Control to the desired setting.

LOW COOL .......................... for sleeping comfort HIGH COOL ........................ for maximum cooling

LOW and HIGH FAN ........ for circulating room air when no cooling is desired

3.Turn the Thermostat Control to the desired setting. You can adjust the air conditioner’s cooling performance by turning the Thermo- stat Control clockwise for more cooling or counterclockwise for less cooling. You will need to experiment to find the setting which suits you best.

NOTE: If you turn your air conditioner off or if the compressor turns off when lowering the Thermo- stat Control, wait at least 3 minutes before turning it back on or you may blow a fuse or trip a circuit breaker.