ElectricalRequirements
Below are electrical plug variations, choose the one which matches the ampere rating of your unit. Your model’s ampere rating is printed on the model and serial number label, attached to the unit, behind the front panel. (See diagram on
we 2.)
OBSERVE ALL LOCAL CODES AND
ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER SUPPLY CORD GROUNDING PRONG.
NOTE: If codes permit and a separate grounding wire is used, it is recommended that a qualified electrician determine that the grounding path is adequate and not interrupted by plastic, non- metallic gaskets or other insulating materials.
PLUG TYPE | ELECTRICAL |
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or electrical shock.
I | Electrical | Shock | Hazard |
1 | Plug into a grounded | three | prong outlet. |
Do not remove ground prong. Do not use an adapter.
Do not fuse neutral or grounding circuit.
I Do not use air conditioner with front panel removed.
Failure to follow these instructions can result in death, electrical shock, or serious injury.
REQUIREMENTS | SEE PAGE |
I 3.prong groufling plug
Power supply cord
- 3.prong grounding type wall receplacle
115 volt | models with amperes up | 4 |
through | 7.5 |
|
For | 115 volt | models with amperes | 5 |
from | 7.6 to | 12.0 |
|
Power s”&~ly cord
I
I
‘K blade | - | Receptacle |
|
| 230/208 volt models with amperes | 6 |
|
| up through 12.0 |
|
tandem | \- | Grounding |
|
blades | Prong |
|