Whirlpool ACU072XE installation instructions

Page 9

IL

Fire Hazard

Do not use an extension cord.

Doing so can result in death, fire, or electrical shock.

P

P

al

7.Remove the 2 screws from the outer edges of the top of the cabinet. Use these and the additional 3 screws supplied to attach the top trim frame.

6.Use 6 of the screws supplied to attach the left and right vertical trim frames to the existing holes in the cabinet.

9.Slide the air conditioner fully into the sleeve. Center the air conditioner in the sleeve so that all seals bear evenly to prevent leakage.

10.Use the 2 screws supplied to attach the bottom trim frame to the existing holes in the vertical trim frame.

Electrical Shock Hazard

Plug into a grounded three prong outlet. Do not remove ground prong.

Do not use an adapter.

Do not fuse neutral or grounding circuit. Do not use air conditioner with front panel removed.

Failure to follow these instructions can result in death, electrical shock, or serious injury.

11.Before inserting the plug into the power supply, make sure the Fan Control is OFF.

Image 9
Contents Use81CareGuide Contents Plug Type ElectricalRequirementsUpthrough7.5 115volt modelswith amperes from 7.6 through12.0 230/208volt modelswith amperesupthrough12.0 Beforeinstalling your air conditioner Installation InstructionsPage Page Startingyourair conditioner OperatingInstructionsChangingair direction Exhaustvent controlCleaningthe front panel CleaningInstructionsCleaningthe slide-out air filter Annual maintenance MaintenanceInstructionsEnergysavingtips Problem Check if TroubleshootingIf you need service’ RequestingAssistanceorServiceWhirlpool