Installation Instructions
Excessive Weight Hazard
Use two or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
This air conditioner has been designed for installation through the wall, in a sleeve. It is the responsibility and obligation of the customer to have this product installed by a qualified techni- cian familiar with
OR
If you choose to install the air conditioner yourself, read all installation instructions, as well as the electrical requirements and operating instructions, before installing your unit. This will help to avoid any installation problems and will help ensure
Beforeinstalling your air conditioner
Installation tips
l
l
l
l
Inspect the condition of the wall where the air conditioner will be installed. Be sure it will support the weight of the unit.
Watch out for the sharp metal fins on the front and rear coils.
Be sure your air conditioner does not fall during installation.
Do not install the air conditioner where the plastic cabinet front will be exposed to a heat source that raises the surface temperature above 120°F.
Tools required
l Phillips screwdriver
Installing your air conditioner
Installing in an old sleeve
1.Remove the rear grille from the sleeve and replace it with the new grille.
2.The part number label on the grille should face the inside of the room.
NOTE: If your sleeve is of another make, you can purchase a sleeve and adapter kit designed to adapt your sleeve to this air conditioner. An accessory kit is also available for window installa- tion. Both kits are available from your local dealer.
continued on next page