Whirlpool CA15WYR0 manual Attach Support Legs, Install SMART-MOUNTTray Assembly in Wall Opening

Attach Support Legs

1.Determine the correct slots on the tray side from the type of exterior construction of the building.

Thin wall construction (vinyl, wood, etc.)

A

A. First and second slots

Thick wall construction (brick)

A

A. Second and third slots

2.Insert carriage bolt up through slot on tray-frame side and support leg.

3.Place one end of tray center over carriage bolt.

4.Then place flat washer, lock washer and hex nut.

NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.

A

B

C

D

	E
A. Hex nut	D. Tray center
B. Lock washer	E. Carriage bolt
C. Flat washer

5.Insert second carriage bolt through tray side and attach other end of support leg.

NOTE: Do not tighten. The leg must be able to move freely to adjust angle when installed.

A

B

C

	D
A. Hex nut	C. Flat washer
B. Lock washer	D. Carriage bolt

6.Install support leg on other side.

Install SMART-MOUNT®Tray Assembly in Wall Opening

1.From inside, place SMART-MOUNT®tray, support legs facing down, in the wall opening. Match the holes in tray side with the predrilled holes in wall opening.

12