Whirlpool CA15WYR0 manual Window Installation, Attach Support Legs, Assemble SMART-MOUNTTray

Window Installation

1.Using the tray back as a template, center in windowsill against outside edge of stool.

C

B

A

A. Tray back

B.Windowsill

C.Outside edge of stool

2.Using the 2 inside screw holes in tray back, mark screw locations on windowsill for mounting the SMART-MOUNT®tray.

1.To assemble the tray frame, insert tab on tray back into slot on tray side. Check to see that the tab is engaged and the

2 pieces are aligned. Insert 2 - #8 - 18 x ¹⁄₄" hex-head screws to secure.

2.Repeat with other tray side.

C

B

A

A. Tray back

B. #8 - 18 x ¹⁄₄" hex-head screws

C. Tray side

Attach Support Legs

1. Determine the correct slots on the tray side from the type of exterior construction of the building.

Thin Wall Construction (vinyl, wood, etc.)

A

3.Remove tray back. Using these marks, drill ³⁄₃₂" pilot holes in

the windowsill approximately 1¹⁄₂" (3.8 cm) deep.

Assemble SMART-MOUNT®Tray

A. First and second slots

Thick Wall Construction (brick)

A

A. Second and third slots

6