Whirlpool CA15WYR0 manual Top of wall opening Top channel Air conditioner

Page 14

2.If the feet on the bottom of the air conditioner do not rest on the wood strip, remove the air conditioner and adjust the SMART-MOUNT®tray until feet rest on the wood strip.

B A

C

A. Air conditioner

B. Feet on bottom of air conditioner

C. ³⁄₄" (1.9 cm) x 2" (5 cm) wood strip

3.If top channel does not rest against the top of the wall opening, remove air conditioner and adjust SMART-MOUNT®tray until top channel rests against wall.

IMPORTANT: The tray must slope downward slightly toward the outside to provide proper drainage for the air conditioner.

A

B

C

A. Top of wall opening

B. Top channel

C. Air conditioner

4.If the bottom of the air conditioner does not sit against the bottom of the SMART-MOUNT®tray, remove air conditioner

and adjust angle of tray until air conditioner sits against the bottom of the tray.

IMPORTANT: The tray must slope downward slightly toward the outside to provide proper drainage for the air conditioner.

A

B

A. Air conditioner sitting on SMART-MOUNT®tray

B.SMART-MOUNT®tray

5.Install screws through the top channel to secure the air conditioner into the wall opening.

Complete Installation

1.Trim and seal around the air conditioner on the inside and the outside.

NOTE: Allow for removal of the air conditioner at a later time for routine annual maintenance.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.Plug into a grounded 3 prong outlet.

3.Press RESET on the power supply cord plug.

14

Image 14
Contents AIR Conditioner 1188226BTable of Contents AIR Conditioner SafetyLocation Requirements Installation RequirementsTools and Parts Recommended grounding method Window InstallationElectrical Requirements Unpack the Air Conditioner Power Supply CordTo test your power supply cord Remove packaging materialsThin Wall Construction vinyl, wood, etc Window InstallationAttach Support Legs Assemble SMART-MOUNTTrayInstall SMART-MOUNTTray Assembly in Window Top View Bottom View Side View Prepare Air Conditioner for Window InstallationTop View Install Side Curtains Position the Air Conditioner in Window Correct InstallationIncorrect Installation Attach Side Curtains to WindowTop View Through-the-Wall InstallationComplete Installation Option 1-Wood, Metal or Plastic MoldingInstall Wood Frame Install SMART-MOUNTTray Assembly in Wall Opening Right Side Position the Air Conditioner Through the WallLeft Side Top of wall opening Top channel Air conditioner Fan Speed AIR Conditioner USEStarting Your Air Conditioner-Digital Control ModeTimer Delay TemperatureTo change the temperature display from F to C To clear Timer delay programTo lower the temperature To select the modeTo raise the temperature Starting Your Air Conditioner-Rotary Control Models Without Power Saver Exhaust Control on some modelsModels With Power Saver Changing Air Direction Normal SoundsRepairing Paint Damage Cleaning the Air FilterCleaning the Front Panel Annual MaintenanceTroubleshooting Air conditioner seems to run too muchWater drips from cabinet into your house Temperature on display does not match room temperatureAir conditioner cycles on and off too much or does not cool U.S.A Assistance or ServiceAccessories 1188226B