Temperature
■Press the plus button to raise the temperature. Room indicator light will turn off, and Set indicator light will turn on. Display shows the Temperature control setting. Each time you press or hold the plus button, the temperature will increase 1º until it reaches 86°F (30°C).
NOTE: After 3 seconds, Set indicator light will turn off, and Room indicator light will turn on. Display will show the current room temperature.
■Press the minus button to lower the temperature. Room indicator light will turn off, and Set indicator light will turn on. Display shows the Temperature control setting. Each time you press or hold the minus button, the temperature will decrease 1º until it reaches 64°F (18°C).
NOTE: After 3 seconds, Set indicator light will turn off, and Room indicator light will turn on. Display will show the current room temperature.
To change the temperature display from °F to °C:
1.Turn off the air conditioner.
2.While the air conditioner is off, press and hold down the MODE and FAN SPEED buttons while pressing POWER to turn on the air conditioner.
NOTE: Follow these same steps to change the temperature display from °C to °F.
Timer Delay
To set the Timer for a 1- to
1.Press TIMER. Timer indicator light will flash. Hour indicator light will turn on, and display will show remaining hours before air conditioner will turn off.
2.Press the plus or minus button to adjust the delay time (1 to 24 hours).
3.Press TIMER again or wait 10 seconds. Timer indicator light will remain on. Hour indicator light will turn off, and Room indicator light will turn on. Display will show the current room temperature.
To set the Timer to turn on the air conditioner, keeping previous settings:
1.Turn off air conditioner.
2.Press TIMER. Timer indicator light will flash. Hour indicator light will turn on, and display will show remaining hours before air conditioner will turn on.
3.Press the plus or minus button to change delay time (1 to 24 hours).
4.Press TIMER again or wait 10 seconds. Timer indicator light will remain on. Hour indicator light will turn off, and Room indicator light will turn on. Display will show current room temperature.
To set the Timer to turn on the air conditioner, changing the previous settings:
1.Turn on air conditioner.
2.Adjust Mode to Auto, Cool, Fan Only, or Power Saver. NOTE: For Auto mode, go to Step 4.
3.For Cool, Fan Only or Power Saver mode, adjust FAN SPEED to Turbo, High or Low.
4.Adjust temperature between 64°F (18ºC) and 86°F (30ºC).
5.Wait 3 seconds before turning off air conditioner.
6.Press TIMER. Timer indicator light will flash. Hour indicator light will turn on, and display will show remaining hours before air conditioner will turn on.
7.Press the plus or minus button to change delay time (1 to 24 hours).
8.Press TIMER again or wait 10 seconds. Timer indicator light will remain on. Hour indicator light will turn off, and Room indicator light will turn on. Display will show current room temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
Press and hold TIMER for 3 seconds. Timer indicator light will shut off.
To see or change the remaining time (in hours):
1.Press TIMER once after it has been programmed. Hour indicator light will turn on, and display will show remaining time.
2.While the display is showing the remaining time, you can press the plus or minus button to increase or decrease the time.
3.After 10 seconds, Hour indicator light will turn off, and Room indicator light will turn on. Display will show the current room temperature.
16