Allied International Home Security System Camera I/O connector pin assignment 12 pin, K7600040

Page 42

Camera interfaces

Camera I/O connector pin assignment (12 pin):

DOLPHIN, OSCAR, MARLIN, PIKE, STINGRAY

The 12-pin camera I/O connector (DOLPHIN, OSCAR, MARLIN, PIKE, STINGRAY) is also designed for industrial use and, in addition to providing access to the inputs and outputs on the camera, it also provides a serial interface for e.g. the firmware update.

The connector is available in straight and angled version under the following numbers:

Order text

 

Order number

 

 

 

 

 

PC-12P 12-Pin

 

K7600040

HR10A-10P-12S

 

cable connector female

 

 

 

PC-12PW 12-Pin

K7600044

HR10A-10LT-12S

 

angled cable connector female

 

 

 

 

 

 

 

Table 10: Order numbers: I/O connector

Note

AVT supplies suitable I/O cables of different lengths (up to

 

 

10 m) as shown below.

 

 

 

 

Order text

Length

Order number

 

 

 

Trigger cable

2.0 m

E1000648

12-pin HIROSE female to BNC

 

 

 

 

 

Trigger cable

5.0 m

E1000772

12-pin HIROSE female to BNC

 

 

 

 

 

Trigger cable

2.0 m

E1000728

12-pin HIROSE female to open end

 

 

 

 

 

Trigger cable

10.0 m

E1000736

12-pin HIROSE female to open end

 

 

 

 

 

I/O cable

2.0 m

K1200191

12-pin HIROSE female to open end

 

 

 

 

 

I/O cable

3.0 m

K1200192

12-pin HIROSE female to open end

 

 

 

 

 

Table 11: Order numbers: trigger and I/O cables

Hardware Installation Guide V2.0.0

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Hardware Installation Guide AVT CamerasLegal notice Allied Vision Technologies GmbH 03/2008Contents Control and video data signals Camera interfaces Ieee 1394a port pin assignmentOrdering and commercial information Contacting Allied Vision TechnologiesInfo Technical information AVT Modular Camera ConceptIntroduction Document historyManual overview Read all notes and cautions carefully Conventions used in this manualStyles Style Function ExampleMore information SymbolsAVT accessories Existing applicationsPackages Www For more information on accessories go toAVT software WwwAVT Technical Manuals Www For downloading the Technical Manuals go toSafety instructions General safety instructionsFireWire hot-plug and screw-lock precautions FireWire safety instructionsChanging filters safety instructions Screw-lock precautionsGuppy changing filters safety instructions PIKE/OSCAR changing filters safety instructionsMarlin changing filters safety instructions PIKE/STINGRAY GOF connectors PIKE/STINGRAY voltagesGuppy voltages MARLIN/OSCAR voltages Dolphin voltagesSafety instructions Safety instructions for board level cameras Ited warranty or cancelation of warrantyTions before use Board level cameras Loading Always use clean boardsBoard level cameras General Warnings Board level cameras Dirty environmentsWarranty precautions AVT camera cleaning instructionsWarranty General warningsAvoiding the necessity of camera cleaning Where is the impurity? Locating impurities Is it an impurity? Identifying impuritiesCamera type Tool to be used Description Cleaning Instructions Medical-grade sterile optical cottonScratches Are not free from contaminationIar with cleaning a camera with this instrument AVT dealerAVT cameras installing hardware AVT SoftwarePackagesHardware conditions 1394b for different requirementsMarlin / Oscar / Guppy FireWire cable DescriptionK1200165 K1200162Overview hardware installation Installing Ieee 1394 adapterDo not touch the shield of the camera cable con Connecting camera to PC or laptopHot-plug precautions CameraPin camera Connector Status LEDs Ieee 1394b connector copperCamera interfaces Hirose and 1x 1394a Hirose and 1x 1394a Hirose and 2x 1394bRear view of AVT cameras Hirose and 1394 copper Pike fiber Stingray fiber Ieee 1394a port pin assignment Pin SignalCable power Cable GNDSignal Pin Board level camera Ieee 1394a port pin assignmentCable shield Makes it possible to control the camera and output VP Power, VCCIeee 1394b port pin assignment PIKE, Stingray Second cameraGOF transmission uses MMF multi-mode fiber at 850 nm PowerPIKE/STINGRAY fiber infos and cautions Optical connection okSion Plug cleanOn the GOF connector Please note that optical fiber cables have aPin Signal Direction Level Description Camera I/O pin assignment 8 pin GuppyBoard level camera Guppy I/O pin assignment K7600040 Camera I/O connector pin assignment 12 pinOrder text Order number As shown belowPin Signal Use Dolphin familyOscar and Marlin family GPOutput Open emitterPike and Stingray family Level DescriptionControl and video data signals Technical ManualsInputs DOLPHIN, OSCAR, MARLIN, GUPPY, PIKE, Stingray Guppy outputs are not short-circuit-proofInput schematics Pike Flux voltage from LED type 1.2 V at 20 mAFlux voltage from LED type 1.5 V at 10 mA Input characteristics Flux voltage OSCAR, MARLIN, PikeCycle delay of the optical coupler Recommended Description Ratings Operating conditionsGuppy The inputs can be connected directly to +5 Voltages above +30 V may damage the optical coupler ALL Cameras The following note is valid for all camerasRegisters see the Technical Manuals Input Ground InGND Pin no from camera I/O connector Pike Input Ground InGND Pin no from camera I/O connector StingrayOutputs Dolphin Parameter Test condition ValueOutVCC Resistor value See Output schematics with external resistor R Dolphin on Configuration via registers see Technical ManualsOutputs OSCAR/MARLIN Emitter current Max mA Emitter collector voltageOutputs Guppy Outputs Operating conditionsOutputs Pike Output parameters Pike00 µs Rise time 60 µs Voltage above +45 V may damage the optical couplerSym Value Condition Bol Storage 48.00 µsOutputs Stingray Output parameters Stingray78 µs Rise time 65 µs ≈ 5 mA loadVoltage above +30 V may damage the optical coupler Storage 27.6 µsFirmware update Contact your local dealerIndex Optical coupler OperatingOperating system 40, 42
Top Page Image Contents