Allied International Home Security System manual Safety instructions for board level cameras

Safety instructions

Safety instructions for board level cameras

Note	Read the Guppy Technical Manual and this safety instruc-
	tions before use.
	Abuse or misapplication of the camera may result in lim-
	ited warranty or cancelation of warranty.

Caution-ESD Board level cameras: ESD warnings

•Only qualified personnel is allowed to install and oper- ate the Board level cameras.

•Board level camerass are delivered without housing. Handle the sensor board and main board with care. Do not bend the boards. Do not touch the components or contacts on a board. Hold a board by its edges.

•Sensor board and main board are sensitive to electro- static discharge. To avoid possible damage, handle all static-sensitive boards and components in a static-safe work area. Follow the procedures below.

•ESD (electrostatic discharge): Static electricity can damage the sensor board or the main board of your Board level cameras. To prevent static damage, dis- charge static electricity from your body before you touch any of your Board level cameras’s electronic com- ponents, such as sensor board or main board. To do so, use a static-safe work area with static-dissipative mat and wear a static-dissipative wrist strap. Do not hold any components of your Board level cameras against your clothing. Even if you are wearing a wrist strap, your body is grounded but your clothes are not.

•Do not remove the sensor board and main board from its anti-static packaging unless your body is grounded.

•ESD shielding: To protect the boards from radiation of other modules or devices use a special ESD protective housing.

Hardware Installation Guide V2.0.0

18