Allied International Home Security System manual Board level cameras General Warnings

Page 19

Safety instructions

Caution

Caution

Caution

Board level cameras: General Warnings

•Be sure that all power to your board level cameras is switched off, before mounting the sensor board or mak- ing connections to the camera.

•Do not connect or disconnect any cables during an elec- trical storm.

•Do not use your board level cameras during an electrical storm.

•To help avoid possible damage to the sensor board or main board, wait 5 seconds after power is switched off, before connecting or disconnecting any cable to the board level cameras.

•Ensure that nothing rests on the cables of your board level cameras.

•Keep your board level cameras away from radiators and heat sources.

•Do not spill food or liquids on your board level cameras.

Board level cameras: Loading

•Avoid any mechanical forces to the board level cameras, the boards and its components, especially torsional, tensile and compressive forces. Any of these forces may result in damage of the board level cameras, the boards and its components.

•To avoid damages of the boards, provide cables with an external pull relief so that no force is applied to the connectors itself.

Board level cameras: Dirty environments

•Always use clean boards.

•To protect the boards from dirt like dust, liquids or swarf always use the board level cameras only in clean room environment or use a protective housing.

Hardware Installation Guide V2.0.0

19

Image 19

Contents AVT Cameras Hardware Installation GuideAllied Vision Technologies GmbH 03/2008 Legal noticeContents Camera interfaces Ieee 1394a port pin assignment Control and video data signalsAVT Modular Camera Concept Contacting Allied Vision TechnologiesInfo Technical information Ordering and commercial informationDocument history IntroductionManual overview Style Function Example Conventions used in this manualStyles Read all notes and cautions carefullyExisting applications SymbolsAVT accessories More informationWww Www For more information on accessories go toAVT software PackagesWww For downloading the Technical Manuals go to AVT Technical ManualsGeneral safety instructions Safety instructionsScrew-lock precautions FireWire safety instructionsChanging filters safety instructions FireWire hot-plug and screw-lock precautionsPIKE/OSCAR changing filters safety instructions Guppy changing filters safety instructionsMarlin changing filters safety instructions PIKE/STINGRAY voltages PIKE/STINGRAY GOF connectorsGuppy voltages Dolphin voltages MARLIN/OSCAR voltagesSafety instructions Ited warranty or cancelation of warranty Safety instructions for board level camerasTions before use Board level cameras Dirty environments Always use clean boardsBoard level cameras General Warnings Board level cameras LoadingGeneral warnings AVT camera cleaning instructionsWarranty Warranty precautionsAvoiding the necessity of camera cleaning Is it an impurity? Identifying impurities Where is the impurity? Locating impuritiesCamera type Tool to be used Description Medical-grade sterile optical cotton Cleaning InstructionsAre not free from contamination ScratchesAVT dealer Iar with cleaning a camera with this instrumentAVT SoftwarePackages AVT cameras installing hardware1394b for different requirements Hardware conditionsK1200162 FireWire cable DescriptionK1200165 Marlin / Oscar / GuppyInstalling Ieee 1394 adapter Overview hardware installationCamera Connecting camera to PC or laptopHot-plug precautions Do not touch the shield of the camera cable conIeee 1394b connector copper Pin camera Connector Status LEDsCamera interfaces Hirose and 1x 1394a Hirose and 2x 1394b Hirose and 1x 1394aRear view of AVT cameras Hirose and 1394 copper Pike fiber Stingray fiber Cable GND Pin SignalCable power Ieee 1394a port pin assignmentBoard level camera Ieee 1394a port pin assignment Signal PinCable shield Second camera VP Power, VCCIeee 1394b port pin assignment PIKE, Stingray Makes it possible to control the camera and outputOptical connection ok PowerPIKE/STINGRAY fiber infos and cautions GOF transmission uses MMF multi-mode fiber at 850 nmPlease note that optical fiber cables have a Plug cleanOn the GOF connector SionCamera I/O pin assignment 8 pin Guppy Pin Signal Direction Level DescriptionBoard level camera Guppy I/O pin assignment As shown below Camera I/O connector pin assignment 12 pinOrder text Order number K7600040Dolphin family Pin Signal UseGPOutput Open emitter Oscar and Marlin familyLevel Description Pike and Stingray familyTechnical Manuals Control and video data signalsGuppy outputs are not short-circuit-proof Inputs DOLPHIN, OSCAR, MARLIN, GUPPY, PIKE, StingrayFlux voltage from LED type 1.2 V at 20 mA Input schematics PikeRecommended Description Ratings Operating conditions Input characteristics Flux voltage OSCAR, MARLIN, PikeCycle delay of the optical coupler Flux voltage from LED type 1.5 V at 10 mAGuppy The inputs can be connected directly to +5 ALL Cameras The following note is valid for all cameras Voltages above +30 V may damage the optical couplerRegisters see the Technical Manuals Input Ground InGND Pin no from camera I/O connector Stingray Input Ground InGND Pin no from camera I/O connector PikeParameter Test condition Value Outputs DolphinOutVCC Resistor value Configuration via registers see Technical Manuals See Output schematics with external resistor R Dolphin onEmitter current Max mA Emitter collector voltage Outputs OSCAR/MARLINOutputs Operating conditions Outputs GuppyOutput parameters Pike Outputs PikeStorage 48.00 µs Voltage above +45 V may damage the optical couplerSym Value Condition Bol 00 µs Rise time 60 µsOutput parameters Stingray Outputs StingrayStorage 27.6 µs ≈ 5 mA loadVoltage above +30 V may damage the optical coupler 78 µs Rise time 65 µsContact your local dealer Firmware updateIndex 40, 42 OperatingOperating system Optical coupler