CC408 Operators Guide 10. Isolating Zones
EN 11
9.3Fire Alarm
The horn speaker emits a distinct fire sound when both the [4] and [6] keys are pressed simultaneously. Contact your installer to disable the ability to activate the codepad fire alarm or to silence the codepad fire alarm.
9.4Medical Alarm
An audible alarm activates when both the [7] and [9] keys are pressed simultaneously. Contact your installer to disable the ability to activate the codepad medical alarm or to silence codepad medical alarm.
9.5Tamper Alarm (Access Denied)
The tamper alarm restricts the number of times an invalid user code can be used in an attempt to operate the system. When the number of incorrect code attempts equals the number programmed by your installer, the system activates an alarm condition. If reporting back to a security monitoring station, the system sends an Access Denied Report.
To shutdown and lockout a codepad for a period of time (0 to 150 seconds), ask your installer to program this feature.
10. Isolating Zones
Isolating zones allow you to manually disable one or more zones before arming the system. Once a zone is isolated, you can access that zone during the armed state without activating an alarm.
For example, you may need to isolate a zone because before arming the system a PIR detector might generate a false alarm, or you need to leave a pet inside a particular zone while away.
Isolating zones is performed by one of two methods. Method two is optional and only allows those user codes programmed by your installer access to isolate zones.
10.1Standard Isolating
Standard Isolating allows all operators to isolate zones without knowing a valid user code.
How to Isolate a Zone
1.Press the [*] key twice to enter Isolating Mode. Three beeps sound and the STAY indicator flashes.
2.Enter the zone number (1 to 8), followed by the [*] key (for example, [1 *] = Zone 1, [2 *] = Zone 2).
Each zone to isolate has a corresponding zone indicator that flashes. If you selected an incorrect zone to isolate, enter the incorrect zone number again followed by the [*] key.
Repeat Step 2 if you are isolating more than one zone, until all zones to isolate are selected.
3.Press the [#] key after all selected zones are isolated.
Two beeps sound and the system returns to the disarmed state.
10.2Code to Isolate
Only those user codes with the Code to Isolate priority level can isolate zones. If any user code has this priority level, the standard isolating method (see Section 10.1 Standard Isolating) does not function.
How to Isolate a Zone
1.Press the [*] key followed by your user code and the [*] key again to enter Isolating Mode (for example, [* 2 5 8 0 *]). Three beeps sound and the STAY indicator flashes.
2.Enter the zone number (1 to 8), followed by the [*] key (for example, [1 *] = Zone 1, [2 *] = Zone 2).
Each zone to isolate has a corresponding zone indicator that flashes. If you selected an incorrect zone to isolate, enter the incorrect zone number again followed by the [*] key.
Repeat Step 2, if isolating more than one zone, until all zones to isolate are selected.
3.Press the [#] key after all selected zones are isolated.
Two beeps sound and the system returns to the disarmed state.
11.Setting the Date and Time
Programming the date and time is only required when you need functions such as automatic test reports, automatic arming, and history events to operate correctly.
How to Program Date and Time
1.Enter your Master Code followed by the [6] and [#] keys (for example, [2 5 8 0 6 #]).
Three beeps sound and the STAY and AWAY indicators flash.
2.Enter the day, month, year, hour, and minute using the (DD, MM, YY, HH, MM) format (that is, DD = day of the month, MM = month of the year, YY = current year, HH = hour of the day, MM = minute of the day).
When programming the hour of the day, you must use a
3.Press the [#] key to exit and return to the disarmed state.
Two beeps sound and the STAY and AWAY indicators go dark. If a long beep sounds, an error was made when entering the date and time.