Bosch Appliances CC408 manual Introduction, Specifications, Features

Page 5

CC408 Operators Guide 1. Introduction

EN 5

1.Introduction

Congratulations on selecting the Solution 880 Model CC408 Control Panel to protect you and your property. To obtain the most from your unit, take the time to read through this manual and familiarise yourself with the operating features of this system. In all aspects of planning, engineering, styling, operation, convenience, and adaptability, we have sought to anticipate your every possible requirement.

Programming simplicity and speed were some of the major considerations and we believe that our objectives in this area were more than satisfied.

This guide explains all aspects of operating the control panel. All system parameters and options are detailed. Suitability is left up to the individual. Every system can be tailored to meet all requirements quickly and easily.

2.Specifications

Table 1: Specifications

Temperature Range

0oC to +45 oC

 

(+32 oF to +113 oF)

Humidity

10% to 95%

Power Source

TF008 Plug Pack –

 

240 VAC/18 VAC @ 1.3 A

Stand-By Current

65 mA

Current Draw In

115 mA

Alarm Condition

 

Current Draw In

105 mA

Alarm Condition

 

with Codepad

 

Back-Up Battery

6 Ah/12 VDC Rechargeable

 

sealed lead acid battery

Dimensions (case,

30.6 cm x 26.2 cm x 8.4 cm

packed in carton)

(12.05 in. x 10.31 in. x 3.31 in.)

Weight

2.5 Kg (5.51 lb.)

Supplier Code

N771

New Zealand

PTC 211/98/083

Telepermit

 

Malaysia Approval

Pending

Number

 

The Austel permit issued for this product is subject to the following conditions: The Solution 880 Model CC408 Control Panel can only be powered by a Bosch Security Systems TF008 Plug Pack (Approval Number Q92128).

Test the sirens, strobe, and zones at weekly intervals. See Section 17 Testing for further information.

3.Features

The Solution 880 Control Panel uses the latest in microprocessor technology to provide you with more useful features and superior reliability and performance. The main features of the control panel are listed below:

ξ Eight programmable User Codes

ξ STAY Mode and AWAY Mode operation

ξ Six programmable burglary zones

ξ Two programmable 24-hour zones

ξ Siren and/or dialler lockout per zone

ξ Delayed reporting

ξ Built-in telephone fail monitor

ξ Day alarm

ξ Remote arming

ξ Answering machine bypass

ξ Event memory recall

ξ Upload/download programmable

ξ Auxiliary output (Output 2)

ξ Relay output

ξ Eight radio remote user codes

ξ Entry and exit warning beeper

ξ EDMSAT – satellite siren compatible

ξ Separate fire alarm sound

ξ Dual reporting

ξ Sensor watch

ξ Dynamic battery testing

ξ Automatic arming/automatic disarming

ξ AC fail and system fault indicators

ξ Walk Test Mode

ξ Monitored siren output (Output 1)

ξ Strobe output

ξ Telco arm/disarm sequence (call forwarding)

Bosch Security Systems 5/04 920050O.OG.112

Image 5
Contents Operators Guide CC408 Bosch Security Systems 5/04 920050O.OG.112 Copyright Notice New Zealand Telepermit Notes Contents Tables Features SpecificationsSpecifications IntroductionZone Indicators Codepad IndicatorsAway Indicator Stay IndicatorArming the System Arming in Stay Mode Arming in Away ModeUser Codes Disarming the SystemDuress Alarm AlarmsPanic Alarm Radio Transmitter OperationsIsolating Zones Setting the Date and TimeSystem Faults Fault Analysis ModeFault Descriptions AC FailTelco Disarm Sequence Telco Arm/Disarm Sequence Call Forward On/OffTelco Arm Sequence Testing Reset Latching OutputsTurning Outputs On/Off Codepad ID/Buzzer Tone ChangeRemote Arming By Telephone Day AlarmEvent Memory Recall Domestic Dialling Disable Domestic DiallingAcknowledging Domestic Calls Programming Domestic Telephone NumbersPartitioning Master Partitioned Codepad IndicatorsOperating From a Master Partitioned Codepad Operating From Area Addressable CodepadsSubscriber ID Number Basic Pager ReportingZone Status Zone Status Display Descriptions678 01200000 9000 Arms or disarms Glossary of TermsOn the same telephone line ModeMode. In Australia, this feature is called Call Forward Service Notes Installation NotesZone Description Isolated Day Alarm Stay Mode Enabled ZoneUser Code Names User Code Bosch Security Systems 5/04 920050O.OG.112Arming Options Entry/Exit TimesOutput Descriptions Isolating MethodIndex Unsealed User Codes CC408 Operators Guide Notes Bosch Security Systems S1920050 Issue 112 4998152467B