CC408 Operators Guide 13. Telco Arm/Disarm Sequence (Call Forward On/Off)
EN 13
13.Telco Arm/Disarm Sequence (Call Forward
On/Off)
Use this feature to program the Telco Arm Sequence and Telco Disarm Sequence (Call Forward On/Off).
13.1Telco Arm Sequence
Use this to program the Call Forward – Immediate On sequence or Call Forward – No Answer sequence to automatically operate when you arm the system in AWAY Mode. This feature is only available if your telecommunications provider has the
The examples given in this feature are only applicable to Australia.
Call Forward – Immediate On
You can redirect calls to anywhere in Australia, including mobile phones, pagers, and answering services. When Call Forward is turned on, your telephone does not ring.
Call Forward – No Answer
When your telephone is not answered within 20 seconds, this feature redirects all incoming calls to another number anywhere in Australia, but you can still make outgoing calls.
Table 11: Telco Arm/Disarm Dialling Digits
Digit | Number to | Digit | Number to |
Required | Program | Required | Program |
0 | 0 | 8 | 8 |
1 | 1 | 9 | 9 |
2 | 2 |
|
|
3 | 3 | * | *1 |
4 | 4 | # | *2 |
5 | 5 | *3 | |
6 | 6 | break | *4 |
7 | 7 |
|
|
How to Program the Telco Arm Sequence
1.Enter your
[2 5 8 0 3 #]).
Three beeps sound and the STAY and AWAY indicators flash.
2.Press button [1] and [#] keys to select the Telco Arm Sequence.
Three beeps sound.
3.Enter the call forward sequence (for example, [* 6 1][Phone Number][#] to program the Call Forward - No Answer sequence, or [* 2 1][Phone Number][#] to program the Call Forward Immediate sequence).
To program a “*” in the Telco Arm Sequence, enter [* 1]. To program a “#” in the Telco Arm Sequence, enter [* 2].
4.Press the [#] key when finished.
Two beeps sound, and the STAY and AWAY indicators go dark.
To disable the Telco Arm Sequence, enter the call forward sequence as [* 4] (break) for Step 3.
13.2Telco Disarm Sequence
This feature automatically disables the call forward sequence when disarming the system.
How to Program the Telco Disarm Sequence
1.Enter your
[2 5 8 0 3 #]).
Three beeps sound and the STAY and AWAY indicators flash.
2.Press the [2] and [#] key to select the Telco Disarm Sequence. Three beeps sound.
3.Enter the call forward disable sequence (for example, [# 6 1 #] to disable the No Answer Call Forward sequence, or [# 2 1 #] to disable the Call Forward Immediate sequence).
To program a “#” in the Telco Disarm Sequence, enter [* 2].
4.Press the [#] key when finished.
Two beeps sound, and the STAY and AWAY indicators go dark.
To disable the Telco Disarm Sequence, enter the call forward sequence as [* 4] (break) for Step 3.