CC408 Operators Guide Contents
EN 3
Contents |
| |
1. | Introduction | 5 |
2. | Specifications | 5 |
3. | Features | 5 |
4. | Codepad Indicators | 6 |
4.1 | Zone Indicators | 6 |
4.2 | AWAY Indicator | 6 |
4.3 | STAY Indicator | 6 |
4.4 | System Disarmed | 6 |
4.5 | MAINS Indicator | 7 |
4.6 | Off Indicator/Zone Sealed | 7 |
4.7 | On Indicator/Zone In Alarm | 7 |
4.8 | FAULT Indicator | 7 |
4.9 | Audible Indications | 7 |
5. | Arming the System | 7 |
5.1 | Arming in AWAY Mode | 8 |
5.2 | Arming in STAY Mode 1 | 8 |
5.3 | Arming in STAY Mode 2 | 8 |
5.4 | Programming STAY Mode 2 Zones | 9 |
6. | Disarming the System | 9 |
7. | User Codes | 9 |
7.1 | Adding User Codes | 9 |
7.2 | Adding Radio Remote User Codes | 9 |
7.3 | Deleting User Codes/Radio User Codes | 9 |
8. | Radio Transmitter Operations | 10 |
9. | Alarms | 10 |
9.1 | Duress Alarm | 10 |
9.2 | Panic Alarm | 10 |
9.3 | Fire Alarm | 11 |
9.4 | Medical Alarm | 11 |
9.5 | Tamper Alarm (Access Denied) | 11 |
10. | Isolating Zones | 11 |
10.1 | Standard Isolating | 11 |
10.2 | Code to Isolate | 11 |
11. | Setting the Date and Time | 11 |
12. | Fault Analysis Mode | 12 |
12.1 | AC Fail | 12 |
12.2 | System Faults | 12 |
12.3 | Fault Descriptions | 12 |
13.Telco Arm/Disarm Sequence (Call Forward
| On/Off) | 13 |
13.1 | Telco Arm Sequence | 13 |
13.2 | Telco Disarm Sequence | 13 |
14. | Turning Outputs On/Off | 14 |
15. | Reset Latching Outputs | 14 |
16. | Codepad ID/Buzzer Tone Change | 14 |
17. | Testing | 14 |
17.1 | Horn Speaker Test | 14 |
17.2 | Bell Test | 14 |
17.3 | Strobe Test | 14 |
17.4 | Walk Test Mode | 14 |
17.5 | Test Report | 14 |
18. | Event Memory Recall | 15 |
19. | Day Alarm | 15 |
20. | Remote Arming By Telephone | 15 |
21. | Domestic Dialling | 16 |
21.1 | Acknowledging Domestic Calls | 16 |
21.2Programming Domestic Telephone
| Numbers | 16 |
21.3 | Disable Domestic Dialling | 16 |
22. | Partitioning | 17 |
22.1 | Master Partitioned Codepad Indicators | 17 |
22.1.1 | Zone Indicators | 17 |
22.1.2 | Area On/Off Indicators | 17 |
22.2.1 | Area Display Indicators | 17 |
22.2.2 | Status Indicators | 17 |
22.3Operating From A Master Partitioned
Codepad | 17 |
22.4Operating From Area Addressable
| Codepads | 17 |
23. | Basic Pager Reporting | 18 |
24. | Glossary of Terms | 20 |
25. | Installation Notes | 22 |
Figures |
| |
Figure 1: CP5 Eight Zone LED Codepad | 6 | |
Figure 2: CP5 Eight Zone LCD Codepad | 6 | |
Figure 3: RE012 – 2 Channel Keyfob |
| |
| Transmitter | 10 |
Figure 4: RE013 – 4 Channel Keyfob |
| |
| Transmitter | 10 |
Figure 5: CP5 LED Codepad Showing Audible |
| |
| Alarm Buttons | 10 |
Figure 6: Master Partitioned Codepad | 17 | |
Figure 7: Basic Pager Display | 19 | |