Video Manager Instruction Manual Operation | EN 16 |
|
|
Functional Notes for Figures 7 & 8:
1.Using keyboard 1, full control of the selected video device is available on the monitors connected to Video Manager outputs 1A and 1B.
2.Using keyboard 2, full control of the selected video device is available on the monitors connected to Video Manager outputs 2A and 2B.
3.Using keyboard 3, full control of the Monitor A or Monitor B outputs of the selected video device is available on the monitor connected to Video Manager output 3A.
4.Using keyboard 4, full control of the Monitor A or Monitor B outputs of the selected video device is available on the monitor connected to Video Manager output 4A.
NOTE: No special alarm monitor switching is supported when four keyboards are connected in the system.
7.0 OPERATION
Video Manager operation is automatic. The unit completely configures itself during the
Refer to the instructions supplied with the video devices and/or the keyboards for complete information on the operation of the video devices and any pan/tilt/zoom equipped cameras connected to them.
8.0MAINTENANCE
The Video Manager does not require any special maintenance.
9.0REPLACEMENT PARTS
Item: | Part number: |
Replacement Rack Mount Kit | 303 1895 501 |
Replacement Keyboard Data Cable
303 0239 001
Replacement 390 Ohm Termination Device 303 2728 001
Replacement AC Line Cord, 120 VAC
Source from local supplier
Replacement AC Line Cord
Bosch Security Systems December 5, 2005