For Indoor Product

LTC 8540/00 Series Instruction Manual Safety Precautions	EN 4

1.Water and Moisture - Do not use this unit near water - for example, in a wet basement, in an unprotected outdoor installation or in any area classified as a wet location.

2.Object and Liquid Entry - Never push objects of any kind into this unit through openings, as they may touch dangerous voltage points or short out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit.

3.Power Cord and Power Cord Protection - For units intended to operate with 230VAC, 50Hz, the input and output power cord must comply with the latest versions of IEC Publication 227 or IEC Publication 245.

Power supply cords should be routed so they are not likely to be walked on or pinched. Pay particular attention to location of cords and plugs, convenience receptacles, and the point of exit from the appliance.

4.Overloading - Do not overload outlets and extension cords; this can result in a risk of fire or electrical shock.

For Outdoor Product

Power Lines - An outdoor system should not be located in the vicinity of overhead power lines, electric lights or power circuits, or where it may contact such power lines or circuits. When installing an outdoor system, extreme care should be taken to keep from touching power lines or circuits, as this contact might be fatal. U.S.A. models only - refer to the National Electrical Code Article 820 regarding installation of CATV systems.

For Rack-mount Product

1.Ventilation - This unit should not be placed in a built-in installation or rack, unless proper ventilation is provided, or the manufacturer’s instructions have been adhered to. The equipment must not exceed its maximum operating temperature requirements.

2.Mechanical Loading - Mounting of the equipment in a rack shall be such that a hazardous condition is not achieved due to uneven mechanical loading.

		WARNING:
		Electrostatic-sensitive device. Use
		proper CMOS/MOSFET handling
	ATTENTION	precautions to avoid electrostatic
	OBSERVE PRECAUTIONS	discharge.
	FOR HANDLING	discharge.
	ELECTROSTATIC SENSITIVE
	DEVICES

NOTE: Grounded wrist straps must be worn and proper ESD safety precautions observed when handling the electrostatic- sensitive printed circuit boards.

Safety Precautions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates the presence of uninsulated “dangerous voltage” within the product’s enclosure. This may constitute a risk of electric shock.

The user should consult the operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Attention: Installation should be performed by qualified service personnel only in accordance with the National Electrical Code or applicable local codes.

Power Disconnect. Units with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however, the unit is operational only when the ON-OFF switch is in the ON position. The power cord is the main power disconnect for all units.

Bosch Security Systems December 13, 2007

LTC 8540/00 specifications

The Bosch LTC 8540/00 is an advanced kitchen appliance designed to enhance the cooking experience with its innovative features and technologies. This high-performance oven is a blend of cutting-edge engineering and user-friendly functionalities, making it an ideal choice for both novice cooks and seasoned chefs.

One of the standout features of the Bosch LTC 8540/00 is its intuitive control panel. Equipped with a touch display, it allows users to easily navigate through various cooking modes, temperature settings, and timer functions. The clear interface ensures that even the most complex cooking tasks can be accomplished with ease, reducing the learning curve for new users.

This model boasts a multifunctional cooking system, incorporating several cooking modes such as convection baking, grilling, and baking. The convection baking mode circulates hot air, ensuring even cooking and browning. The grilling function is perfect for achieving a perfectly charred finish on meats and vegetables, while the dedicated baking mode provides optimal heat distribution for baked goods.

In terms of technology, the Bosch LTC 8540/00 showcases the brand’s commitment to energy efficiency. It operates with reduced energy consumption, helping users save on utility bills while also being environmentally friendly. Additionally, its rapid preheat function ensures that the oven reaches the desired temperature in a fraction of the time compared to traditional ovens, enhancing overall cooking efficiency.

Another notable characteristic is the built-in self-cleaning feature. This innovative technology utilizes high temperatures to incinerate food residues, eliminating the need for harsh chemicals and manual scrubbing. This not only saves time but also contributes to a cleaner kitchen environment.

The oven's spacious interior can accommodate large dishes and multiple trays, making it ideal for family gatherings and dinner parties. The sleek design and stainless-steel finish add a modern touch to any kitchen decor, blending seamlessly with surrounding appliances.

Overall, the Bosch LTC 8540/00 stands out for its combination of advanced features, user-friendly design, and efficient cooking technologies. It represents a perfect blend of functionality and aesthetics, tailored to meet the demands of contemporary cooking. Whether baking, roasting, or grilling, it promises to deliver consistent and delicious results every time.