Operating Instructions, Depth Adjustment, Line Guide

SM 1619X01359 02-06 2/16/06 1:50 PM Page 9

Operating Instructions

DEPTH ADJUSTMENT

Disconnect plug from power source. Loosen the depth adjustment lever located between the guard and handle of saw. Hold the foot down with one hand and raise or lower saw by the handle. Tighten lever at the depth setting desired. Check desired depth (Fig. 3).

Not more than one tooth length of the blade should extend below the material to be cut, for minimum splintering (Fig. 3).

DEPTH ADJUSTMENT	FIG. 3
LEVER

ONE TOOTH LENGTH SHOULD

PENETRATE WOOD FOR MINIMUM SPLINTERING

90° CUTTING ANGLE CHECK

Disconnect plug from power source. Set foot to maximum depth of cut setting. Loosen bevel adjustment lever, set to 0° on quadrant, retighten bevel adjustment lever first, then the depth adjustment lever and check for 90° angle between the blade and bottom plane of foot with a square (Fig. 4).

QUADRANT		FIG. 4
45° STOP	BEVEL
SPRING	ADJUSTMENT
	LEVER

0°

FOOT90°BLADE

BEVEL ADJUSTMENT

Disconnect plug from power source. The foot can be adjusted up to 45° by loosening the bevel adjustment lever at the front of the saw. Align to desired angle on calibrated quadrant. Then tighten bevel adjustment first, then the depth adjustment lever (Fig. 5). For 60° cuts, loosen depth adjustment lever, align 60° mark on depth bracket with mark on housing and tighten lever (Fig. 1). Then loosen bevel adjustment lever, depress 45° stop spring, adjust foot to 60° and tighten lever (Fig. 5). Because of the increased amount of blade engagement in the work and decreased

stability of the foot, blade binding may occur. Keep the saw steady and the foot firmly on the workpiece.

	45° STOP	FIG. 5
QUADRANT	SPRING

BEVEL

ADJUSTMENT

LEVER

LINE GUIDE

For a straight 90° cut, use the large notch in the foot. For 45° bevel cuts, use the small notch (Fig. 6). The cutting guide notch will give an approximate line of cut. Make sample cuts in scrap lumber to verify actual line of cut. This will be helpful because of the number of different blade types and thicknesses available. To ensure minimum splintering on the good side of the material to be cut, face the good side down.

90°	45° / 60°		FIG. 6
VERTICAL	BEVEL
CUTS	CUTS
FOOT
		PUSH
		45°STOP
		SPRING IN
		DIRECTION
		OF ARROW
		FOR 60°
		BEVEL
		ADJUSTMENT

-9-

HD5860 specifications

The Skil HD5860 is a powerful and versatile tool designed for both professional and amateur woodworkers. This heavy-duty saw is renowned for its exceptional performance, precision, and advanced features, making it a must-have for anyone looking to take their woodworking projects to the next level.

One of the standout features of the HD5860 is its robust 14-amp motor, which delivers fast and efficient cutting power. With the ability to reach speeds of up to 5,300 RPM, this saw can easily tackle a variety of materials, including hardwood, softwood, and engineered lumber. Its high-speed performance ensures clean cuts with minimal effort, allowing users to take on even the most challenging projects.

The Skil HD5860 is equipped with a lightweight aluminum base that enhances stability and reduces vibration during operation. This design feature not only improves accuracy but also extends the overall lifespan of the tool. The adjustable bevel angle, which can be set up to 45 degrees, adds versatility, enabling users to make angled cuts effortlessly. Whether you're cross-cutting or making compound angles, this saw provides the flexibility needed for a wide range of applications.

In terms of safety, the HD5860 includes several important features designed to protect the user during operation. The blade guard ensures safe cutting by covering the blade when not in use, while the electric brake stops the blade quickly once the trigger is released. Additionally, the onboard dust port helps maintain a cleaner workspace by connecting to a vacuum system, reducing dust and debris accumulation during cutting.

Another key characteristic is the laser guide system, which projects a line onto the workpiece, allowing for precise alignment and cuts. This feature significantly enhances accuracy, making it easier to follow cutting lines without second-guessing. The saw also comes with a durable carbide-tipped blade, ensuring long-lasting performance and cutting efficiency.

Overall, the Skil HD5860 combines power, precision, and safety in one tool, making it an excellent choice for woodworkers of all skill levels. With its advanced features and reliable performance, this saw is a valuable addition to any workshop, enabling users to achieve professional-quality results with ease. Whether you're undertaking a detailed woodworking project or simply need to make quick cuts, the Skil HD5860 proves to be a dependable partner in your woodworking endeavors.