TP-Link TL-SC3130G Setting, Audio buttons, connected IP cameras, means you can broadcast to the

Page 20
5.1.4 Audio buttons

5.1.4 Audio buttons

Symbols

Meaning

)Note

 

 

 

 

 

means the speakers of your computer are

 

Speakers turned on

turned on to transmit the sounds from the

 

 

connected IP camera(s)

 

Speakers turned off

 

 

 

 

 

 

means you can broadcast to the

 

Microphone turned on

connected IP camera(s) via the Ethernet

 

 

using your microphone

 

Microphone turned off

 

 

 

 

 

Volume control bar

 

 

 

 

5.2 Setting

This function is only for the Administrator. Click this button to get into the Basic and Advanced settings menus.

There are four sub-menus under the BASIC menu, which includes System, Camera, Network, and Security. For more information, you can refer to Section 6.1, Section 6.2, Section 6.3 and Section 6.4.

There are six sub-menus under the Advanced menu, which includes FTP Client, SMTP, HTTP event, Schedule, Motion Detection, and System Log. Fore more information, you can refer to Section 7.1, Section 7.2, Section 7.3, Section 7.4, Section 7.5 and Section 7.6.

15

Page 19 Page 21
Image 20
Page 19 Page 21
Contents REV: 2.0.3 Wireless 2-WayAudio Surveillance CameraTL-SC3130G COPYRIGHT & TRADEMARKS FCC STATEMENT CE Mark WarningCONTENTS ChapterChapter 3 Using IP Camera via Web Browser Chapter 5 Configuration of Main MenuAppendix ……………………………………………………………………………………………….. Setting-AdvancedFAQ………………… ChapterPackage Contents Requirements Chapter 1 Minimum System RequirementsItem Chapter 2 Physical Overview 2.1 Front View2.2 Bottom view 2.3 Hardware Connection2.Connect the power adapter cord to the DC In jack Chapter 3 Using IP Camera via Web Browser 3.1 Obtain the IP Address6.After the installation is finished, click the icon on the desktop or click Start All Programs TP-LINK Intelligent IP Installer Intelligent IP Installer to start using the program 3.2 Windows Web Browser 3.3 Mac Web Browser Page Page Chapter 4 Operating IP Camera via Mobile Phone 4.1 Mobile Phone Viewing4.1.13G Mobile Phone Streaming Viewing 4.1.22.5G Mobile Phone WAP ViewingNote: It will show continuous snapshots 4.2 Using IP Camera via iPhone1. Select Safari function Chapter 5 Configuration of Main Menu Symbols5.1 Live View 5.1.1 SnapshotSymbols Meaning 5.1.3 Video play buttons5.2 Setting using your microphone5.1.4 Audio buttons connected IP cameras5.3.2 View Size 5.3 Client Setting5.3.1 Mode 5.3.4 Video Buffer 5.4 Image Setup5.3.3 Protocol 5.4.5 Default 5.4.1 Brightness5.4.2 Contrast 5.4.3 Saturation6.1.1 Information Chapter 6 Setting-Basic6.1 System 6.1.2 Date / Time 6.1.3 Initialize 6.2 Camera 6.2.1 General ¾RTSP¾RTP ¾Overlay6.2.2MPEG4 A. Computer View¾Multicast Streaming If it is ON ¾Quality¾Quality B. Mobile View¾Multicast Streaming If it is ON ¾Quality 6.3 Network6.2.3 MJPEG 6.3.1 Information z IP address: Enter the IP address of the device 6.3.2 PPPoE Point-to-PointProtocol over Ethernet ¾Use the following DNS server address: Select this when you set the fixed IP address as the IP address of DNS server 6.3.3 DDNS Dynamic DNS How to apply DDNS username and Host name? Page Page 6.3.4 UPnP Universal Plug and Play ¾Device Name: Enter Device Name to your needs 6.3.5 Bonjour6.3.6 IP Notification ¾Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. When the network settings related to the chosen notify type are changed, an e-mailnotification will be sent to inform you of the updated network information of the camera zPOP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP receiving mail server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mailsperforms authentication using the POP user account 6.3.7 Wireless 4.Select the AP you wish to connect z IP address: Enter the IP address of the device 6.4 Security 6.4.1 Account6.4.2 HTTPS When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio Chapter 7 Setting-Advanced 7.1 FTP Client7.1.2 Alarm sending 7.1.1 General¾Alarm ¾Effective period Set the period when the periodical sending is effective 7.1.3 Periodical sending 7.2 SMTP 7.2.1 General →BASIC → Network → IP Notification”¾Authentication: Select the authentication required when you send an email 7.2.2 Alarm sending ¾Alarm¾Effective period: Set the period when the periodical sending is effective 7.2.3 Periodical sending → Setting” 7.3 HTTP event7.3.1 General ¾Alarm 7.3.2 Alarm sending1.The setting of URL should be the same as CGI Page Page 7.4.1 Setting 7.4 Schedule7.5.1 Setting 7.5 Motion Detection7.6.1 Setting 7.6 System LogE-mail : support@tp-link.com Appendix APPENDIX a – FRAME RATE & BIT RATE TABLEA.1 MPEG4 @ 30fps / kbps A.2 MPEG4 / kbps, fpsA.3 MJPEG @ 15fps / kbps A.4 MJPEG / kbps, fpsAPPENDIX b – STORAGE REQUIREMENT TABLE B.3 MPEG4 Storage Requirement GB / channel / day Bitrate SettingFrame-RateSetting Image-SizeQ3.If the image is blurry, what can I do?
Related manuals
Manual 9 pages 51.12 Kb

TL-SC3130G specifications

The TP-Link TL-SC3130G and TL-SC3130 are advanced network cameras designed for home and small business security. These models are part of TP-Link's commitment to providing reliable, high-quality surveillance solutions that enhance safety and peace of mind.

One of the main features of the TL-SC3130G and TL-SC3130 is their ability to deliver clear and detailed video footage. Both cameras are equipped with a high-resolution image sensor that enables them to capture images with excellent clarity, even in low-light conditions. The devices provide up to 640 x 480 images at 30 frames per second, ensuring smooth and lifelike video output.

Both models come with Pan/Tilt functionality, allowing users to control the camera's orientation remotely through a web interface. This feature is particularly beneficial for monitoring large areas as users can adjust the camera's view without physically moving the device. The TL-SC3130G and TL-SC3130 also incorporate a digital zoom feature, enabling viewers to closely inspect specific areas of interest.

Furthermore, these cameras offer night vision capabilities, making them ideal for 24/7 surveillance. With infrared LEDs, the cameras can capture clear images in complete darkness, ensuring that critical areas remain monitored even when visibility is low.

Connectivity is another strong suit of the TL-SC3130G and TL-SC3130. They support wireless (802.11b/g) connectivity, which allows for easy installation without the need for cumbersome cabling. This wireless functionality, coupled with an Ethernet port, makes it versatile for various network setups.

Moreover, both cameras support Motion Detection, sending alerts to users via email or FTP when movement is detected. This feature allows for proactive monitoring, ensuring users are alerted to potential security breaches promptly.

The integration of a built-in microphone and speaker facilitates two-way audio, enhancing communication capabilities. Users can listen to audio on-site and communicate back through the camera, making it easier to interact with people in the camera's vicinity.

In terms of storage, these cameras support both local and remote recording. Users can save footage directly to a Network Video Recorder (NVR) or their computer, ensuring that important footage is preserved.

Overall, the TP-Link TL-SC3130G and TL-SC3130 cameras provide a comprehensive suite of features and technologies that make them ideal for anyone looking to enhance their security system. Their high-quality imaging, versatile connectivity options, and advanced monitoring features make them reliable choices for effective surveillance solutions.
Top Page Image Contents