TP-Link TL-SC3130G manual HTTP event, → Setting”

Page 61
→ Setting”.

digits), minute (2 digits) and second (2 digits), and consecutive number (2 digits), thus 14-digit number is added to the file name.

zSequence number: A consecutive number is added to the Image file name.

zSequence number clear: Click Clear and the suffix of the sequence number returns to 1.

¾Interval: Set the time interval of the period sending. Minimum value is 30 min and Maximal value is 24 hour.

¾Effective period: Set the period when the periodical sending is effective.

zAlways: The periodical sending is always effective.

zSchedule: You can specify the period when the periodical sending is effective in the schedule setting in the other section. Please check “SETTING → Advanced → Schedule

→ Setting”.

)Note:

You can set schedule function on Schedule page. (Please go to “Setting → Advanced → Schedule → Setting”) For more details, you can check Section 7.4.

7.3 HTTP event

Use this menu to set up for capturing and sending images to an HTTP server. By using HTTP client function, you can send the image file and audio file which has been shot and recorded linked with the built-in motion detection function to HTTP server. HTTP client setting menu is composed of two items, General and Alarm sending.

56

Page 60 Page 62
Image 61
Page 60 Page 62
Contents TL-SC3130G Wireless 2-WayAudio Surveillance CameraREV: 2.0.3 COPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTChapter CONTENTSChapter 3 Using IP Camera via Web Browser Chapter 5 Configuration of Main MenuSetting-Advanced Appendix ………………………………………………………………………………………………..FAQ………………… ChapterPackage Contents Item Chapter 1 Minimum System RequirementsRequirements 2.1 Front View Chapter 2 Physical Overview2.2 Bottom view 2.3 Hardware Connection2.Connect the power adapter cord to the DC In jack 3.1 Obtain the IP Address Chapter 3 Using IP Camera via Web Browser6.After the installation is finished, click the icon on the desktop or click Start All Programs TP-LINK Intelligent IP Installer Intelligent IP Installer to start using the program 3.2 Windows Web Browser 3.3 Mac Web Browser Page Page 4.1 Mobile Phone Viewing Chapter 4 Operating IP Camera via Mobile Phone4.1.13G Mobile Phone Streaming Viewing 4.1.22.5G Mobile Phone WAP Viewing1. Select Safari function 4.2 Using IP Camera via iPhoneNote: It will show continuous snapshots Symbols Chapter 5 Configuration of Main Menu5.1 Live View 5.1.1 Snapshot5.1.3 Video play buttons Symbols Meaningusing your microphone 5.2 Setting5.1.4 Audio buttons connected IP cameras5.3.1 Mode 5.3 Client Setting5.3.2 View Size 5.3.3 Protocol 5.4 Image Setup5.3.4 Video Buffer 5.4.1 Brightness 5.4.5 Default5.4.2 Contrast 5.4.3 Saturation6.1 System Chapter 6 Setting-Basic6.1.1 Information 6.1.2 Date / Time 6.1.3 Initialize 6.2 Camera ¾RTSP 6.2.1 General¾RTP ¾OverlayA. Computer View 6.2.2MPEG4¾Multicast Streaming If it is ON ¾Quality¾Multicast Streaming If it is ON B. Mobile View¾Quality 6.2.3 MJPEG 6.3 Network¾Quality 6.3.1 Information z IP address: Enter the IP address of the device 6.3.2 PPPoE Point-to-PointProtocol over Ethernet ¾Use the following DNS server address: Select this when you set the fixed IP address as the IP address of DNS server 6.3.3 DDNS Dynamic DNS How to apply DDNS username and Host name? Page Page 6.3.4 UPnP Universal Plug and Play 6.3.6 IP Notification 6.3.5 Bonjour¾Device Name: Enter Device Name to your needs ¾Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. When the network settings related to the chosen notify type are changed, an e-mailnotification will be sent to inform you of the updated network information of the camera zPOP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP receiving mail server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mailsperforms authentication using the POP user account 6.3.7 Wireless 4.Select the AP you wish to connect z IP address: Enter the IP address of the device 6.4.1 Account 6.4 Security6.4.2 HTTPS When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio 7.1 FTP Client Chapter 7 Setting-Advanced7.1.1 General 7.1.2 Alarm sending¾Alarm ¾Effective period Set the period when the periodical sending is effective 7.1.3 Periodical sending 7.2 SMTP →BASIC → Network → IP Notification” 7.2.1 General¾Authentication: Select the authentication required when you send an email ¾Alarm 7.2.2 Alarm sending¾Effective period: Set the period when the periodical sending is effective 7.2.3 Periodical sending 7.3 HTTP event → Setting”7.3.1 General 1.The setting of URL should be the same as CGI 7.3.2 Alarm sending¾Alarm Page Page 7.4 Schedule 7.4.1 Setting7.5 Motion Detection 7.5.1 Setting7.6 System Log 7.6.1 SettingE-mail : support@tp-link.com APPENDIX a – FRAME RATE & BIT RATE TABLE AppendixA.1 MPEG4 @ 30fps / kbps A.2 MPEG4 / kbps, fpsA.4 MJPEG / kbps, fps A.3 MJPEG @ 15fps / kbpsAPPENDIX b – STORAGE REQUIREMENT TABLE Bitrate Setting B.3 MPEG4 Storage Requirement GB / channel / dayFrame-RateSetting Image-SizeQ3.If the image is blurry, what can I do?
Related manuals
Manual 9 pages 51.12 Kb

TL-SC3130G specifications

The TP-Link TL-SC3130G and TL-SC3130 are advanced network cameras designed for home and small business security. These models are part of TP-Link's commitment to providing reliable, high-quality surveillance solutions that enhance safety and peace of mind.

One of the main features of the TL-SC3130G and TL-SC3130 is their ability to deliver clear and detailed video footage. Both cameras are equipped with a high-resolution image sensor that enables them to capture images with excellent clarity, even in low-light conditions. The devices provide up to 640 x 480 images at 30 frames per second, ensuring smooth and lifelike video output.

Both models come with Pan/Tilt functionality, allowing users to control the camera's orientation remotely through a web interface. This feature is particularly beneficial for monitoring large areas as users can adjust the camera's view without physically moving the device. The TL-SC3130G and TL-SC3130 also incorporate a digital zoom feature, enabling viewers to closely inspect specific areas of interest.

Furthermore, these cameras offer night vision capabilities, making them ideal for 24/7 surveillance. With infrared LEDs, the cameras can capture clear images in complete darkness, ensuring that critical areas remain monitored even when visibility is low.

Connectivity is another strong suit of the TL-SC3130G and TL-SC3130. They support wireless (802.11b/g) connectivity, which allows for easy installation without the need for cumbersome cabling. This wireless functionality, coupled with an Ethernet port, makes it versatile for various network setups.

Moreover, both cameras support Motion Detection, sending alerts to users via email or FTP when movement is detected. This feature allows for proactive monitoring, ensuring users are alerted to potential security breaches promptly.

The integration of a built-in microphone and speaker facilitates two-way audio, enhancing communication capabilities. Users can listen to audio on-site and communicate back through the camera, making it easier to interact with people in the camera's vicinity.

In terms of storage, these cameras support both local and remote recording. Users can save footage directly to a Network Video Recorder (NVR) or their computer, ensuring that important footage is preserved.

Overall, the TP-Link TL-SC3130G and TL-SC3130 cameras provide a comprehensive suite of features and technologies that make them ideal for anyone looking to enhance their security system. Their high-quality imaging, versatile connectivity options, and advanced monitoring features make them reliable choices for effective surveillance solutions.
Top Page Image Contents