TP-Link TL-SC3130G manual B. Mobile View, ¾Multicast Streaming If it is ON, ¾Quality

Page 30
B. Mobile View

B. Mobile View

¾Viewer Authentication: If the viewer authentication is On, the users will be requested to type in username and password when viewing through RTSP.

¾Multicast Streaming (If it is ON)

z Multicast Address: Specify the multicast server address.

z Video / Audio Port: Specify the transmission port number of the video data, which is an even number from 1024 to 65534. It is set to 10000 and 11000 by default.

z Time- to- Live: Set the maximum TTL (Transistor-Transistor Logic) that multicast can pass through.

¾Image Size: Specify the image size when the network camera transmits. You can choose among 320 x 240 and 160 x 120.

¾Frame Rate: Set the frame rate of the MPEG4 image. You can choose values from 5, 10fps. The unit “fps” stands for “frames sent per second”.

¾Quality:

z Fixed Bitrate: Set the bitrate of MPEG4 image transmission for a line. You can select the value from 256, 128, 64, 48, 32, 16 kbps.

25

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Wireless 2-WayAudio Surveillance Camera TL-SC3130GREV: 2.0.3 COPYRIGHT & TRADEMARKS FCC STATEMENT CE Mark WarningChapter 3 Using IP Camera via Web Browser CONTENTSChapter Chapter 5 Configuration of Main MenuFAQ………………… Appendix ………………………………………………………………………………………………..Setting-Advanced ChapterPackage Contents Chapter 1 Minimum System Requirements ItemRequirements 2.2 Bottom view Chapter 2 Physical Overview2.1 Front View 2.3 Hardware Connection2.Connect the power adapter cord to the DC In jack Chapter 3 Using IP Camera via Web Browser 3.1 Obtain the IP Address6.After the installation is finished, click the icon on the desktop or click Start All Programs TP-LINK Intelligent IP Installer Intelligent IP Installer to start using the program 3.2 Windows Web Browser 3.3 Mac Web Browser Page Page 4.1.13G Mobile Phone Streaming Viewing Chapter 4 Operating IP Camera via Mobile Phone4.1 Mobile Phone Viewing 4.1.22.5G Mobile Phone WAP Viewing4.2 Using IP Camera via iPhone 1. Select Safari functionNote: It will show continuous snapshots 5.1 Live View Chapter 5 Configuration of Main MenuSymbols 5.1.1 SnapshotSymbols Meaning 5.1.3 Video play buttons5.1.4 Audio buttons 5.2 Settingusing your microphone connected IP cameras5.3 Client Setting 5.3.1 Mode5.3.2 View Size 5.4 Image Setup 5.3.3 Protocol5.3.4 Video Buffer 5.4.2 Contrast 5.4.5 Default5.4.1 Brightness 5.4.3 SaturationChapter 6 Setting-Basic 6.1 System6.1.1 Information 6.1.2 Date / Time 6.1.3 Initialize 6.2 Camera ¾RTP 6.2.1 General¾RTSP ¾Overlay¾Multicast Streaming If it is ON 6.2.2MPEG4A. Computer View ¾QualityB. Mobile View ¾Multicast Streaming If it is ON¾Quality 6.3 Network 6.2.3 MJPEG¾Quality 6.3.1 Information z IP address: Enter the IP address of the device 6.3.2 PPPoE Point-to-PointProtocol over Ethernet ¾Use the following DNS server address: Select this when you set the fixed IP address as the IP address of DNS server 6.3.3 DDNS Dynamic DNS How to apply DDNS username and Host name? Page Page 6.3.4 UPnP Universal Plug and Play 6.3.5 Bonjour 6.3.6 IP Notification¾Device Name: Enter Device Name to your needs ¾Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. When the network settings related to the chosen notify type are changed, an e-mailnotification will be sent to inform you of the updated network information of the camera zPOP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP receiving mail server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mailsperforms authentication using the POP user account 6.3.7 Wireless 4.Select the AP you wish to connect z IP address: Enter the IP address of the device 6.4 Security 6.4.1 Account6.4.2 HTTPS When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio Chapter 7 Setting-Advanced 7.1 FTP Client7.1.2 Alarm sending 7.1.1 General¾Alarm ¾Effective period Set the period when the periodical sending is effective 7.1.3 Periodical sending 7.2 SMTP 7.2.1 General →BASIC → Network → IP Notification”¾Authentication: Select the authentication required when you send an email 7.2.2 Alarm sending ¾Alarm¾Effective period: Set the period when the periodical sending is effective 7.2.3 Periodical sending → Setting” 7.3 HTTP event7.3.1 General 7.3.2 Alarm sending 1.The setting of URL should be the same as CGI¾Alarm Page Page 7.4.1 Setting 7.4 Schedule7.5.1 Setting 7.5 Motion Detection7.6.1 Setting 7.6 System LogE-mail : support@tp-link.com A.1 MPEG4 @ 30fps / kbps AppendixAPPENDIX a – FRAME RATE & BIT RATE TABLE A.2 MPEG4 / kbps, fpsA.3 MJPEG @ 15fps / kbps A.4 MJPEG / kbps, fpsAPPENDIX b – STORAGE REQUIREMENT TABLE Frame-RateSetting B.3 MPEG4 Storage Requirement GB / channel / dayBitrate Setting Image-SizeQ3.If the image is blurry, what can I do?
Related manuals
Manual 9 pages 51.12 Kb

TL-SC3130G specifications

The TP-Link TL-SC3130G and TL-SC3130 are advanced network cameras designed for home and small business security. These models are part of TP-Link's commitment to providing reliable, high-quality surveillance solutions that enhance safety and peace of mind.

One of the main features of the TL-SC3130G and TL-SC3130 is their ability to deliver clear and detailed video footage. Both cameras are equipped with a high-resolution image sensor that enables them to capture images with excellent clarity, even in low-light conditions. The devices provide up to 640 x 480 images at 30 frames per second, ensuring smooth and lifelike video output.

Both models come with Pan/Tilt functionality, allowing users to control the camera's orientation remotely through a web interface. This feature is particularly beneficial for monitoring large areas as users can adjust the camera's view without physically moving the device. The TL-SC3130G and TL-SC3130 also incorporate a digital zoom feature, enabling viewers to closely inspect specific areas of interest.

Furthermore, these cameras offer night vision capabilities, making them ideal for 24/7 surveillance. With infrared LEDs, the cameras can capture clear images in complete darkness, ensuring that critical areas remain monitored even when visibility is low.

Connectivity is another strong suit of the TL-SC3130G and TL-SC3130. They support wireless (802.11b/g) connectivity, which allows for easy installation without the need for cumbersome cabling. This wireless functionality, coupled with an Ethernet port, makes it versatile for various network setups.

Moreover, both cameras support Motion Detection, sending alerts to users via email or FTP when movement is detected. This feature allows for proactive monitoring, ensuring users are alerted to potential security breaches promptly.

The integration of a built-in microphone and speaker facilitates two-way audio, enhancing communication capabilities. Users can listen to audio on-site and communicate back through the camera, making it easier to interact with people in the camera's vicinity.

In terms of storage, these cameras support both local and remote recording. Users can save footage directly to a Network Video Recorder (NVR) or their computer, ensuring that important footage is preserved.

Overall, the TP-Link TL-SC3130G and TL-SC3130 cameras provide a comprehensive suite of features and technologies that make them ideal for anyone looking to enhance their security system. Their high-quality imaging, versatile connectivity options, and advanced monitoring features make them reliable choices for effective surveillance solutions.
Top Page Image Contents