TP-Link TL-SC3130G manual z IP address: Enter the IP address of the device

Page 33
z IP address: Enter the IP address of the device.

¾Use the following IP address: Select this when the fixed IP address is set.

z IP address: Enter the IP address of the device.

z Subnet mask: Enter the subnet mask.

z Default gateway: Enter the default gateway.

¾Use the following DNS server address: Select this when you set the fixed IP address as the IP address of DNS server.

z Primary DNS server: Enter the IP address of the primary DNS server.

z Secondary DNS server (optional): Enter the IP address of the secondary DNS server if necessary.

¾HTTP port number: Select 80 in general situations. If you want to use a port number other than 80, select the text box and enter a port number between 1024 and 65535.

z When you have set the HTTP port number to a number other than 80 on the Network setting page or in the Setup Program, access the device by typing the IP address of the device on the web browser as follows: for example, when HTTP port number is set to 2000, you should type in http://192.168.1.100:2000/ to access the device.

The change of settings will not take effect until the camera is rebooted. Please go to “SETTING→ BASIC → System → Initialize” page and click the Reboot button as shown in the figure below after you make some changes.

28

Image 33
Contents Wireless 2-WayAudio Surveillance Camera TL-SC3130GREV: 2.0.3 COPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTChapter CONTENTSChapter 3 Using IP Camera via Web Browser Chapter 5 Configuration of Main MenuSetting-Advanced Appendix ………………………………………………………………………………………………..FAQ………………… ChapterPackage Contents Chapter 1 Minimum System Requirements ItemRequirements 2.1 Front View Chapter 2 Physical Overview2.2 Bottom view 2.3 Hardware Connection2.Connect the power adapter cord to the DC In jack 3.1 Obtain the IP Address Chapter 3 Using IP Camera via Web Browser6.After the installation is finished, click the icon on the desktop or click Start All Programs TP-LINK Intelligent IP Installer Intelligent IP Installer to start using the program 3.2 Windows Web Browser 3.3 Mac Web Browser Page Page 4.1 Mobile Phone Viewing Chapter 4 Operating IP Camera via Mobile Phone4.1.13G Mobile Phone Streaming Viewing 4.1.22.5G Mobile Phone WAP Viewing4.2 Using IP Camera via iPhone 1. Select Safari functionNote: It will show continuous snapshots Symbols Chapter 5 Configuration of Main Menu5.1 Live View 5.1.1 Snapshot5.1.3 Video play buttons Symbols Meaningusing your microphone 5.2 Setting5.1.4 Audio buttons connected IP cameras5.3 Client Setting 5.3.1 Mode5.3.2 View Size 5.4 Image Setup 5.3.3 Protocol5.3.4 Video Buffer 5.4.1 Brightness 5.4.5 Default5.4.2 Contrast 5.4.3 SaturationChapter 6 Setting-Basic 6.1 System6.1.1 Information 6.1.2 Date / Time 6.1.3 Initialize 6.2 Camera ¾RTSP 6.2.1 General¾RTP ¾OverlayA. Computer View 6.2.2MPEG4¾Multicast Streaming If it is ON ¾QualityB. Mobile View ¾Multicast Streaming If it is ON¾Quality 6.3 Network 6.2.3 MJPEG¾Quality 6.3.1 Information z IP address: Enter the IP address of the device 6.3.2 PPPoE Point-to-PointProtocol over Ethernet ¾Use the following DNS server address: Select this when you set the fixed IP address as the IP address of DNS server 6.3.3 DDNS Dynamic DNS How to apply DDNS username and Host name? Page Page 6.3.4 UPnP Universal Plug and Play 6.3.5 Bonjour 6.3.6 IP Notification¾Device Name: Enter Device Name to your needs ¾Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. When the network settings related to the chosen notify type are changed, an e-mailnotification will be sent to inform you of the updated network information of the camera zPOP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP receiving mail server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mailsperforms authentication using the POP user account 6.3.7 Wireless 4.Select the AP you wish to connect z IP address: Enter the IP address of the device 6.4.1 Account 6.4 Security6.4.2 HTTPS When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio 7.1 FTP Client Chapter 7 Setting-Advanced7.1.1 General 7.1.2 Alarm sending¾Alarm ¾Effective period Set the period when the periodical sending is effective 7.1.3 Periodical sending 7.2 SMTP →BASIC → Network → IP Notification” 7.2.1 General¾Authentication: Select the authentication required when you send an email ¾Alarm 7.2.2 Alarm sending¾Effective period: Set the period when the periodical sending is effective 7.2.3 Periodical sending 7.3 HTTP event → Setting”7.3.1 General 7.3.2 Alarm sending 1.The setting of URL should be the same as CGI¾Alarm Page Page 7.4 Schedule 7.4.1 Setting7.5 Motion Detection 7.5.1 Setting7.6 System Log 7.6.1 SettingE-mail : support@tp-link.com APPENDIX a – FRAME RATE & BIT RATE TABLE AppendixA.1 MPEG4 @ 30fps / kbps A.2 MPEG4 / kbps, fpsA.4 MJPEG / kbps, fps A.3 MJPEG @ 15fps / kbpsAPPENDIX b – STORAGE REQUIREMENT TABLE Bitrate Setting B.3 MPEG4 Storage Requirement GB / channel / dayFrame-RateSetting Image-SizeQ3.If the image is blurry, what can I do?
Related manuals
Manual 9 pages 51.12 Kb

TL-SC3130G specifications

The TP-Link TL-SC3130G and TL-SC3130 are advanced network cameras designed for home and small business security. These models are part of TP-Link's commitment to providing reliable, high-quality surveillance solutions that enhance safety and peace of mind.

One of the main features of the TL-SC3130G and TL-SC3130 is their ability to deliver clear and detailed video footage. Both cameras are equipped with a high-resolution image sensor that enables them to capture images with excellent clarity, even in low-light conditions. The devices provide up to 640 x 480 images at 30 frames per second, ensuring smooth and lifelike video output.

Both models come with Pan/Tilt functionality, allowing users to control the camera's orientation remotely through a web interface. This feature is particularly beneficial for monitoring large areas as users can adjust the camera's view without physically moving the device. The TL-SC3130G and TL-SC3130 also incorporate a digital zoom feature, enabling viewers to closely inspect specific areas of interest.

Furthermore, these cameras offer night vision capabilities, making them ideal for 24/7 surveillance. With infrared LEDs, the cameras can capture clear images in complete darkness, ensuring that critical areas remain monitored even when visibility is low.

Connectivity is another strong suit of the TL-SC3130G and TL-SC3130. They support wireless (802.11b/g) connectivity, which allows for easy installation without the need for cumbersome cabling. This wireless functionality, coupled with an Ethernet port, makes it versatile for various network setups.

Moreover, both cameras support Motion Detection, sending alerts to users via email or FTP when movement is detected. This feature allows for proactive monitoring, ensuring users are alerted to potential security breaches promptly.

The integration of a built-in microphone and speaker facilitates two-way audio, enhancing communication capabilities. Users can listen to audio on-site and communicate back through the camera, making it easier to interact with people in the camera's vicinity.

In terms of storage, these cameras support both local and remote recording. Users can save footage directly to a Network Video Recorder (NVR) or their computer, ensuring that important footage is preserved.

Overall, the TP-Link TL-SC3130G and TL-SC3130 cameras provide a comprehensive suite of features and technologies that make them ideal for anyone looking to enhance their security system. Their high-quality imaging, versatile connectivity options, and advanced monitoring features make them reliable choices for effective surveillance solutions.