TP-Link TL-SC3130G manual

Page 43
zPOP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account.

zPOP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP (receiving mail) server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mails performs authentication using the POP user account.

zUser name, Password: Type the username and password of the user who has the mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication.

¾Recipient e-mail address: Type the recipient e-Mail address up to 64 characters. You can specify up to three recipient E-mail addresses.

¾Administrator e-mail address: Type the Administrator e-Mail address up to 64 characters. This address is used for reply mail and sending system messages from the SMTP server.

¾Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is sent according to the IP notification.

¾Message: Type the text of the E-mail up to 384 characters. Default value provides network information including IP, Port, MAC, Model, Firmware Version and Web Version.

38

Page 42 Page 44
Image 43
Page 42 Page 44
Contents TL-SC3130G Wireless 2-WayAudio Surveillance CameraREV: 2.0.3 COPYRIGHT & TRADEMARKS CE Mark Warning FCC STATEMENTChapter 5 Configuration of Main Menu CONTENTSChapter Chapter 3 Using IP Camera via Web BrowserChapter Appendix ………………………………………………………………………………………………..Setting-Advanced FAQ…………………Package Contents Item Chapter 1 Minimum System RequirementsRequirements 2.3 Hardware Connection Chapter 2 Physical Overview2.1 Front View 2.2 Bottom view2.Connect the power adapter cord to the DC In jack 3.1 Obtain the IP Address Chapter 3 Using IP Camera via Web Browser6.After the installation is finished, click the icon on the desktop or click Start All Programs TP-LINK Intelligent IP Installer Intelligent IP Installer to start using the program 3.2 Windows Web Browser 3.3 Mac Web Browser Page Page 4.1.22.5G Mobile Phone WAP Viewing Chapter 4 Operating IP Camera via Mobile Phone4.1 Mobile Phone Viewing 4.1.13G Mobile Phone Streaming Viewing1. Select Safari function 4.2 Using IP Camera via iPhoneNote: It will show continuous snapshots 5.1.1 Snapshot Chapter 5 Configuration of Main MenuSymbols 5.1 Live View5.1.3 Video play buttons Symbols Meaningconnected IP cameras 5.2 Settingusing your microphone 5.1.4 Audio buttons5.3.1 Mode 5.3 Client Setting5.3.2 View Size 5.3.3 Protocol 5.4 Image Setup5.3.4 Video Buffer 5.4.3 Saturation 5.4.5 Default5.4.1 Brightness 5.4.2 Contrast6.1 System Chapter 6 Setting-Basic6.1.1 Information 6.1.2 Date / Time 6.1.3 Initialize 6.2 Camera ¾Overlay 6.2.1 General¾RTSP ¾RTP¾Quality 6.2.2MPEG4A. Computer View ¾Multicast Streaming If it is ON¾Multicast Streaming If it is ON B. Mobile View¾Quality 6.2.3 MJPEG 6.3 Network¾Quality 6.3.1 Information z IP address: Enter the IP address of the device 6.3.2 PPPoE Point-to-PointProtocol over Ethernet ¾Use the following DNS server address: Select this when you set the fixed IP address as the IP address of DNS server 6.3.3 DDNS Dynamic DNS How to apply DDNS username and Host name? Page Page 6.3.4 UPnP Universal Plug and Play 6.3.6 IP Notification 6.3.5 Bonjour¾Device Name: Enter Device Name to your needs ¾Notify Type: You can select the notify type among DHCP, Static IP, and PPPoE. When the network settings related to the chosen notify type are changed, an e-mailnotification will be sent to inform you of the updated network information of the camera zPOP server name: It is necessary when the POP before SMTP is selected in Authentication. Type the POP receiving mail server name up to 64 characters, or type the IP address of the POP server. This setting is necessary when the SMTP server which sends e-mailsperforms authentication using the POP user account 6.3.7 Wireless 4.Select the AP you wish to connect z IP address: Enter the IP address of the device 6.4.1 Account 6.4 Security6.4.2 HTTPS When enable HTTPS with RTSP on mode, the IP Camera only protect the setting such as username and password and do not protect video and audio 7.1 FTP Client Chapter 7 Setting-Advanced7.1.1 General 7.1.2 Alarm sending¾Alarm ¾Effective period Set the period when the periodical sending is effective 7.1.3 Periodical sending 7.2 SMTP →BASIC → Network → IP Notification” 7.2.1 General¾Authentication: Select the authentication required when you send an email ¾Alarm 7.2.2 Alarm sending¾Effective period: Set the period when the periodical sending is effective 7.2.3 Periodical sending 7.3 HTTP event → Setting”7.3.1 General 1.The setting of URL should be the same as CGI 7.3.2 Alarm sending¾Alarm Page Page 7.4 Schedule 7.4.1 Setting7.5 Motion Detection 7.5.1 Setting7.6 System Log 7.6.1 SettingE-mail : support@tp-link.com A.2 MPEG4 / kbps, fps AppendixAPPENDIX a – FRAME RATE & BIT RATE TABLE A.1 MPEG4 @ 30fps / kbpsA.4 MJPEG / kbps, fps A.3 MJPEG @ 15fps / kbpsAPPENDIX b – STORAGE REQUIREMENT TABLE Image-Size B.3 MPEG4 Storage Requirement GB / channel / dayBitrate Setting Frame-RateSettingQ3.If the image is blurry, what can I do?
Related manuals
Manual 9 pages 51.12 Kb

TL-SC3130G specifications

The TP-Link TL-SC3130G and TL-SC3130 are advanced network cameras designed for home and small business security. These models are part of TP-Link's commitment to providing reliable, high-quality surveillance solutions that enhance safety and peace of mind.

One of the main features of the TL-SC3130G and TL-SC3130 is their ability to deliver clear and detailed video footage. Both cameras are equipped with a high-resolution image sensor that enables them to capture images with excellent clarity, even in low-light conditions. The devices provide up to 640 x 480 images at 30 frames per second, ensuring smooth and lifelike video output.

Both models come with Pan/Tilt functionality, allowing users to control the camera's orientation remotely through a web interface. This feature is particularly beneficial for monitoring large areas as users can adjust the camera's view without physically moving the device. The TL-SC3130G and TL-SC3130 also incorporate a digital zoom feature, enabling viewers to closely inspect specific areas of interest.

Furthermore, these cameras offer night vision capabilities, making them ideal for 24/7 surveillance. With infrared LEDs, the cameras can capture clear images in complete darkness, ensuring that critical areas remain monitored even when visibility is low.

Connectivity is another strong suit of the TL-SC3130G and TL-SC3130. They support wireless (802.11b/g) connectivity, which allows for easy installation without the need for cumbersome cabling. This wireless functionality, coupled with an Ethernet port, makes it versatile for various network setups.

Moreover, both cameras support Motion Detection, sending alerts to users via email or FTP when movement is detected. This feature allows for proactive monitoring, ensuring users are alerted to potential security breaches promptly.

The integration of a built-in microphone and speaker facilitates two-way audio, enhancing communication capabilities. Users can listen to audio on-site and communicate back through the camera, making it easier to interact with people in the camera's vicinity.

In terms of storage, these cameras support both local and remote recording. Users can save footage directly to a Network Video Recorder (NVR) or their computer, ensuring that important footage is preserved.

Overall, the TP-Link TL-SC3130G and TL-SC3130 cameras provide a comprehensive suite of features and technologies that make them ideal for anyone looking to enhance their security system. Their high-quality imaging, versatile connectivity options, and advanced monitoring features make them reliable choices for effective surveillance solutions.
Top Page Image Contents