Motorola CM340, CM360 manual Selecting a Radio Channel, Sending a Call, Making a Selective Call

Selecting a Radio Channel

Your radio offers up to 100 channels (CM360), 10 channels (CM340), however some may not be programmed. Check with your dealer for more information.

Press G to increment the Channel number or H to decrement it.

Using a Memory Channel button

A programmable button may be pre-programmed by your dealer as a Memory Channel button, allowing you quick access to a frequently used channel. A press of the button will take you to the assigned channel.

Using the Microphone Keypad (CM360) (If programmed)

Enter the desired channel number on the keypad.

Press # on the keypad or a short press on C(CM360 only) selects the channel.

Sending a Call

1.Select the desired radio channel.

2.Press the PTT button and speak clearly into the microphone.Your mouth should be 2.5 to 5 cm away from the microphone.

3.When transmitting, the red indicator will light continuously.

4.Release the PTT button to listen.

Your radio may be configured for ‘Transmit Inhibit’ under certain conditions (e.g. when the channel is in use by others) in which case, the channel busy tone will sound when you press the PTT or call button to indicate that transmission is inhibited.

Making a Selective Call

You can make a selective call to a particular radio, known as an individual call, or a group of radios, known as a group call.

You can make calls by using the Contact List, the Missed Calls List or Manual Dialling (using the keypad microphone).

BASIC USER GUIDE

9English