Linksys RDI-36-H HCI-36-H Fireplace Specifications, Front, Left Side, Right Side, Top View

1 ¹⁄₂" Metal Safety Strips

Figure 8

Blocking

Metal Safety Strips

FIREPLACE SPECIFICATIONS
	12 ¹⁄₂"
	(318 mm)
9"
(229 mm)
		16 ¹⁵⁄₁₆"
		(428 mm)
	36"	44 ¹⁄₄"
	(914 mm)	(1124 mm)
20 ³⁄₁₆"	2	⁷⁄₈"
(513 mm)
	(73 mm)
		7 ¹⁄₈"
		(181 mm)

41 ³⁄₄"

(1060 mm)

Front

Fireplace Top Spacer

Figure 9

Step 3. Refer to fireplace drawings and specifi- cations on pages 6 and 7 for framing dimensions and details. Frame appliance enclosure as illus- trated in Figures 11 through 14 on page 8.

IMPORTANT: UNDER NO CIRCUMSTANCES CAN THE FIREPLACE TOP SPACERS (FIGURE 10 ) BE REMOVED OR MODIFIED, NOR MAY YOU NOTCH THE HEADER TO FIT AROUND OR BE INSTALLED LOWER THAN THE SPACERS. THE HEADER MAY BE IN DIRECT CONTACT WITH THE TOP SPACERS BUT MAY NOT BE SUPPORTED BY THEM.

Gas Line

Access

21 ⁵⁄₁₆"

(541 mm)

Left Side

	Combustion	9 ⁷⁄₈"
	Air Inlet	(251 mm)
	Gas Line
	Access	44 ¹⁄₄"
		(1124 mm)
39 ³⁄₁₆"		10 ¹⁄₈"
		(257 mm)
(995 mm)
36 ⁵⁄₁₆"	17 ⁷⁄₁₆"
(922 mm)		11 ⁷⁄₁₆"
	(443 mm)
		(290 mm)
		Junction
		Box
		20 ¹¹⁄₁₆"
		(525 mm)

Right Side

6

Note: The framed depth, 21 ³⁄₄" (552 mm) from a framed wall, must always be measured from a finished surface. If a wall covering such as drywall is to be attached to the rear wall, then the 21 ³⁄₄" (552 mm) must be measured from the drywall surface. It is important that this dimension be exact.

If the appliance is to be elevated above floor level, a solid continuous platform must be constructed.

The header may rest on the top metal spacers, but must not be notched to fit around them.

Consult all local codes.

28 ¹⁄₈"

(714 mm)

12 ¹⁄₂"

8 ¹⁄₁₆" (318 mm)

(205 mm)

21 ⁵⁄₁₆" (541 mm)

Fireplace

Top Spacer

1"		41	³⁄₄"
(25 mm)	(1060 mm)

43 ³⁄₄"

(1111 mm)

Top View

Figure 10

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.