Schlage L-SERIES manual Armored Fronts, Standard Square Corner Armor Strike

L S E R I E S

Armored Fronts Strikes

L-Series armored fronts are produced from brass, bronze or stainless steel material, finished to match lock trim and furnished complete with screws. Numbers for ordering separately or with locks are listed below. Armored fronts are specified in latch column of order form.

All L-Series strikes are produced from brass, bronze or stainless steel material, finished to match lock trim, and are furnished complete with screws. Numbers for ordering separately or with locks are listed below.

Armored Fronts

Square Corner
1Z\v”	1Z\zn”	Description
(32mm)	(27mm)
Width	Width
09-662	09-668	Latch: L9010, 9040
09-663	09-669	Latch x auxiliary latch: L9050, L9060, L9070, L9080, L9082
09-664	09-670	Latch x deadbolt: L9456, L9465, L9466, L9473
09-665	09-671	Deadbolt: L9460, L9462, L9463, L9464
09-666	09-672	Latch x auxiliary latch x deadbolt: L9453, L9485, L9486
09-661	09-667	Blank (no holes): L9175, L9176

Note: For 1C\,” (35mm) doors, 1Z\zn” (27mm) armor must be specified if required.

Strikes

Number	Lip Length	Description
	1C\zn” (30mm)	Standard
10-072	M\,” (22mm), 1” (25mm),	Optional
	1Z\x” (38mm)
	1C\v” (44mm), 2” (51mm)	Special lip
10-073	No lip	For deadbolt lock
10-075	No lip	Z\x” (13mm) Rabbeted
		(use with 1Z\zn” (27mm) armor)
10-091*	1C\zn” (30mm)	Armor front
K510-066	–	Strike box, plastic

*Specify hand of inactive door.

Standard Square Corner

1Z\v” (32mm) Width

Standard Square Corner	Armor Strike
10-072	10-091
1Z\v” x 4M\,” x 1C\zn” Lip	1Z\v” x 8” x 1C\zn” Lip
32mm x 124mm x 30mm	32mm x 203mm x 30mm

Wood Frame Reinforcer	Plastic Strike Box
37-015	K510-066
	1Z\v” x 4C\v” x 1C\zn” Deep
	32mm x 121mm x 30mm

Available for wood door jamb reinforcement. Furnished when specified.

21