Schlage L-SERIES Door Handing, Pull and rotate, Relocate catch screw, Left Hand Reverse Bevel

Page 24

L S E R I E S

Door Handing

One of the revolutionary features of the L-Series mortise lock is that handing can be done by the distributor or installer quickly and easily without opening the lock case. This feature allows a Schlage distributor to order L-Series locks as stock and customize the handing to each order’s specification. This means off-the- shelf delivery to meet today’s fast track construction requirements. The mix and match lever with knob combinations available along with a quickly reversible lock chassis provides the ultimate in stocking, ordering, and installation flexibility. Orders can be filled from on-hand stock, minimizing delivery problems.

LH

Left Hand

LR

Left Hand

Reverse Bevel

RH Right Hand

RR

Right Hand

Reverse Bevel

Changing Lock Hand

No more than two simple steps are required to change the hand of any L-Series lock. Rotate the latch unit 180° and/or change the catch screw position.

The hand is determined by the direction it swings when viewed from the exterior or corridor side of the door.

Pull and rotate

A. Change Latchbolt Handing

Remove armored front. Pull latchbolt away from chassis and rotate complete unit 180° to reverse the door handing. Reinstall armored front.

Relocate catch screw

B. Change Chassis Handing

Remove catch screw from one side of chassis and install on opposite side. For RH and RR, the catch screw will be on the lock case side. For LH and LR, the catch screw will be on the lock case cover.

22

Image 24

Contents Series Extra Heavy Duty Mortise Locks Specifications Exposed TrimPerformance Features Cutaway ViewDoor Preparation Lever Designs & Finishes 625626 Knob Designs & Finishes FinishesMediterranean Designs & Finishes MeranoEscutcheons, Roses, Special Turns & Finishes Full FaceFunctions 4 53 P Cylinder SuffixFunction Lock SeriesMortise Locks-Non-Keyed L9010 F01 Passage LatchL9040 F22 Bath/Bedroom Privacy Lock L9044 Privacy With Coin Turn OutsideMortise Locks-Keyed L9050 F04 Office and Inner Entry LockL9056 L9060 F09 Apartment Entrance LockL9080EL-RX Request To Exit RX Electrified L9080EU-RX Lock L9082 Institution LockL9082 Electrically Locked or L9082EL L9082EU Electrically Unlocked Both SidesHotel Lock w/ Do Not Disturb Indicator L9480 L9485 L9486 F15Storeroom Lock With Deadbolt L9486 Hotel LockDeadbolt With Occupied Indicator Mortise Locks-Keyed DeadlocksL9460 F17 Cylinder x Thumbturn Lock L9462 F16 Double Cylinder LockSpecial Functions L9110 Double Dummy With Active Trim L9482L9040 Privacy With Turns Both Sides L9485 L9460 L9460 With Fixed Dummy TrimStandard Cylinders Primus High Security CylindersPrimus Lockout Cylinders Standard Non-IC Cylinders Standard Non-IC Mortise CylindersEscutcheons Full Size Interchangeable Core Cylinders Full Size IC Mortise CylindersFull Size Interchangeable Cores Only Small Format Interchangeable Core Sfic Cylinders Small Format Interchangeable Core CylindersSmall Format Interchangeable Core Only Core MechanismIC Installation Tool L400 and L9000 SeriesL9060 Outside Only Dimension Blocking and Compression RingsFull Size Core Blocking Ring Requirements Blocking Ring LengthElectrified Locks L9080PEL L9080PEUArmored Fronts Armored FrontsStandard Square Corner Standard Square Corner Armor StrikeDoor Handing Pull and rotateRelocate catch screw Left Hand Reverse BevelHow to Order 626626 625 605Administrative Offices