A-8 | INSTALLATION | A-8 |
| | |
WATER COOLED EQUIPMENT INSTALLATION | |
NOTE: Magnum Coolers operate at 45 psi (3.0 bar) (310 kPa) of pressure for Cooler 10-I and 60 psi (4.0 bar) (414 kPa) of pressure for Cooler 20-I. When used in the demand system, the pressure in the supply hose to the water solenoid or valve can surge to 20 psi (1.4 bar) (138 kPa) above holding pressure just before shutdown. The holding pressure will be 60-65 psi (4.0-4.4 bar) (414-448 kPa). When using the Magnum Cooler with other water cooled TIG, MIG and plasma systems, consult the manufacturer’s instruc- tion manual.
FIGURE 4
Water Cooled TIG Torch Connection
| | | REGULATOR |
| | | FLOWMETER |
| | | ARGON GAS |
| | | CYLINDER |
| | COOLANT | COOLANT |
POWER SOURCE | IN | OUT |
| GAS* |
GAS COOLANT | | |
IN OUT | OUT IN | COOLANT* | |
| |
| | GAS | |
| | COOLANT* | |
| | POWER CABLE ADAPTER* | TIG TORCH |
| | |
| | POWER / COOLANT | |
| | COOLANT | |
TO WORK | | GAS | *INCLUDED IN |
| | KP504 HOOK-UP KIT |
| | |
MAGNUM COOLER 10-I & 20-I
