Guardian Technologies R3010 warranty Problem Solution

Page 5

•Always unplug the unit before servicing it in any way.

•The temperature of the water remaining in the unit after use may be HIGH.

•Do not submerse the unit in water, or allow water to enter anywhere on the unit except the designated water tank.

INSIDE THE BODY OF THE UNIT

Pour excess water out of the unit, but do not allow it to enter the hole where the water vapor comes out. Wash out the unit with fresh water, using the cleaning brush and a soft cloth as needed.

OUTER SURFACE OF THE UNIT

Wipe the surface of the unit with a soft, damp cloth if needed.

WATER TANK

If water spots remain in the water tank, wipe the inside with a soft cloth. DO NOT use soap or detergents.

AIR FILTER

Gently wipe away debris from the filter with a soft cloth.

This filter does NOT need to be replaced.

ULTRASONIC DISK

Remove spray spout (Fig. 1) and use the enclosed cleaning brush to regularly remove build up and deposits from this area (Fig. 2). Diluted vinegar will help to prevent this build up.

Fig. 1

Fig. 2

•Fully dry the inside and outside of the unit before storing it.

•DO NOT leave water in the unit.

•Store in a cool, dry place.

PROBLEM

SOLUTION

Water vapor & humidity are

Power Plug: Unplug and then try again.

not produced.

Power Failure: When the power is returned, try again.

 

 

Tank Installation: Make sure the water tank is

 

correctly attached. Make sure spring on tank

 

cap moves freely when pushed.

 

 

Air blows but water vapor is

Excessive Water: Remove a certain amount of water

not produced.

from the tank.

 

The desired humidity is lower than the current tem-

 

perature: Increase the desired humidity.

 

Detergent residue in the tank: Wash the tank out and

 

try again.

 

 

 

The surface of the ultrasonic metal disk may be dirty:

Humidity level is low.

Wipe it off with a dry, soft cloth. Clean with diluted

 

vinegar.

 

The water in the unit is too cold: Replace with cool,

 

but not cold water.

 

 

Warm humidity is not produced.

It may take 10-15 minutes before warm

 

humidity is created. The mist may not feel

 

warm to the touch.

 

Check to see if base of unit feels warm to the touch.

 

If so then warm mist is being produced.

 

 

The humidity has a bad smell.

Poor maintenance or dirty water: Clean the product

 

thoroughly, and fill it with fresh water.

 

 

White dust is forming on

Hard water will deposit a certain amount of

nearby furniture.

dust. Dust in the air settles because of the

 

added humidity in the room.

 

*Use distilled water if this becomes a nuisance.

 

 

E-8

E-9

Page 4 Page 5
Image 5
Page 4 Page 5
Contents Ultrasonic Digital Humidifier Water Shortage Indicator PowerSilver Clean Technology Night Light/LampMake sure the unit is unplugged 4B. Light Options Night Light Feature Power ButtonWarm or Cool Mist Button Program StartProblem Solution

R3010 specifications

The Guardian Technologies R3010 represents a cutting-edge advancement in the field of air purification. Designed specifically to combat airborne contaminants, this device is an essential addition to any home or office, promising a cleaner and healthier environment. The R3010 integrates a variety of technologies that ensure effective air purification while maintaining a user-friendly design.

One of the standout features of the R3010 is its 3-in-1 HEPA filtration system. This technology captures 99.97% of airborne allergens, including dust, pollen, pet dander, and smoke particles as small as 0.3 microns. This high-efficiency filtration is crucial for individuals who suffer from allergies or respiratory issues, as it significantly reduces the presence of irritants in the air.

In addition to HEPA filtration, the R3010 is equipped with a UV-C light that works together with the filtration system to target and neutralize bacteria, viruses, and mold spores. This dual-action capability enhances the overall effectiveness of the air purifier, ensuring that not only particulates are filtered out, but also harmful microorganisms are dealt with promptly.

The R3010 operates quietly, making it suitable for use in bedrooms, nurseries, and offices. Its sleek and modern design allows it to blend seamlessly into various environments while taking up minimal space. Furthermore, the device features multiple fan speeds that allow users to customize their air purification needs based on room size and air quality requirements.

Another notable characteristic of the Guardian Technologies R3010 is its filter replacement indicator. This smart feature alerts users when it’s time to change the filter, ensuring optimal performance and efficiency. The device is also energy-efficient, designed to run continuously without significantly increasing electricity bills.

Overall, the Guardian Technologies R3010 stands out for its combination of advanced filtration technologies, user-centric design, and energy efficiency. With its focus on providing cleaner air and promoting health, it truly exemplifies the advancements in modern air purification technology, making it a valuable addition to any indoor space.
Top Page Image Contents