![](/images/new-backgrounds/1027232/2723213x1.webp)
|
|
|
| Your | ||
|
|
| Table 1: | |||
|
|
|
|
|
|
|
| # | Feature | Function |
|
| |
| 1 | XGA INPUT 2 HD15F Connector | Connects to the computer graphics source 2 |
| ||
| 2 | DEFAULT SELECT Switch | Slide to left for input 2, slide to right for input 1 |
| ||
| 3 | SIGNAL EXIST | IN 2 Green LED | Lights when the XGA INPUT 2 source is active |
| |
|
|
|
|
| ||
| 4 | IN 1 Green LED | Lights when the XGA INPUT 1 source is active |
| ||
| 5 | XGA INPUT 1 HD15F Connector | Connects to the computer graphics source 1 |
| ||
| 6 | AUDIO IN 2 mini plug Connector | Connects to audio source 2 |
| ||
| 7 | AUDIO IN 1 mini plug Connector | Connects to audio source 1 |
| ||
| 8 | IMAGE OFF | Red LED | Lights when the image is turned off, displaying a blank screen |
| |
|
|
|
|
|
| |
| 9 |
| Button | Blanks the screen | 1 |
|
|
|
|
| |||
| 10 | POWER LED | Lights when receiving power |
| ||
| 11 | LOOP HD15F Connector | For XGA looping to increase output availability (for example, to |
| ||
|
|
|
| connect to an additional monitor) |
|
Figure 2 and Table 2 define the rear panel of the WP-211DS:
Figure 2: WP-211DS Rear Panel
Table 2: WP-211DS Rear Panel Features
| # | Feature |
| Function |
|
| 12 | POWER SUPPLY Terminal | GND PIN | Connect |
|
|
| Block Connector | 12V PIN | Connect (+) to the connector for powering the unit |
|
|
|
|
| ||
|
|
|
|
|
|
| 13 | AUDIO OUT Terminal Block Connector | Connects to the audio acceptor |
| |
| 14 | XGA OUT Terminal Block Connector | Connects to the computer graphics (RGBHV) acceptor |
| |
| 15 | REM (Remote) IN 1 and IN 2 Terminal | Connect to a dry contact switch (see section 5 .5) |
| |
|
| Block Connectors |
|
|
|
| 16 | CAT5 OUTPUT Terminal Block | Connects to the CAT5 line input on the XGA Line Receiver |
| |
|
| Connector |
| (see section 5 .2) |
|
|
|
| |||
| 1 R, G and B signals are blocked, but the H and V (and also audio) are passed through | ||||
|
|
|
|
|
|
4 |
|
| KRAMER: SIMPLE CREATIVE TECHNOLOGY |