Kramer Electronics WP-211DS Wiring the CAT5 Line in / Line OUT RJ-45 Connectors, CAT5 Pinout

Page 9

Using the WP-211DS

5.2 Wiring the CAT5 LINE IN / LINE OUT RJ-45 Connectors

Table 3 and Figure 4 define the UTP CAT5 PINOUT, using pin to pin wiring to connect the WP-211DSoutput to the TP-120input:

Figure 4: CAT5 PINOUT

Table 3: CAT5 PINOUT

TP-120 CAT5

INPUT

PIN	Wire Color
1	BLUE(--)
2	BLUE(+)
3	GREEN(--)
4	+12VDC
5	GND
6	GREEN(+)
7	RED(--)
8	RED(+)

WP-211DS

CAT5 OUTPUT

PIN	Wire Color
1	BLUE(--)
2	BLUE(+)
3	GREEN(--)
4	+12VDC
5	GND
6	GREEN(+)
7	RED(--)
8	RED(+)

6	KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 9

Contents

Model Tables Contents2900-9999992 Introduction About the Power Connect FeatureGetting Started OverviewAbout the WP-211DS Shielded Twisted Pair STP / Unshielded Twisted Pair UTPRecommendations for Achieving the Best Performance Your WP-211DSDefine the rear panel of the WP-211DS Installing the WP-211DS Using the WP-211DSCAT5 Pinout Wiring the CAT5 Line in / Line OUT RJ-45 ConnectorsExample of a WP-211DS Installation Connecting the WP-211DSOperating using the Default Master Source Signal Selection Remote Terminal Block Connector Connecting the Remote ConnectorIncludes the technical specifications Technical SpecificationsOnly the first purchase customer may enforce this warranty 2900-78 REV