Kramer Electronics WP-211DS user manual Shielded Twisted Pair STP / Unshielded Twisted Pair UTP

Page 5

Overview

The other unit is fed over the same CAT5 cable. The Power Connect feature applies as long as the CAT5 cable is heavy gauge cable (that is, it can carry power). The distance does not exceed 50 meters on standard cable.

For a distance of 100 meters, separate power supplies must be connected to the transmitter and to the receiver simultaneously, unless using heavy gauge CAT5 cable.

3.2 Shielded Twisted Pair (STP) / Unshielded Twisted Pair (UTP)

The decision whether to use shielded twisted pair (STP) cable or unshielded twisted pair (UTP) cable depends on the nature of the application.

It is recommended that in applications with high interference, shielded twisted pair (STP) cable will give better results. However, the shield itself does create a capacitance that degrades the frequency response of the machines. For shorter distances, of 50m or so, shielded twisted pair (STP) cable is preferred because it provides protection from interference (degradation is non apparent).

For a long range application, unshielded twisted pair (UTP) cable is preferred. However, the unshielded twisted pair (UTP) cable should be installed far away from electric cables, motors etc., which are prone to create electrical interference.

3.3 About the WP-211DS

Your Kramer WP-211DSWall Plate—available in 4 versions: one for Belgium, one for Germany, one for England (and the rest of Europe), and one for the USA— is a high performance 2x1 automatic switcher for computer graphics and stereo audio signals. The WP-211DSdetects the presence of the active XGA-type input signal from either IN 1 (the default) or IN 2, and automatically routes it to the acceptor connected to the rear panel XGA OUT and the AUDIO OUT connectors. In addition, the WP-211DS:

￿￿With its video bandwidth exceeding 260MHz, ensures transparent operation at the highest resolutions

￿￿Automatically switches the stereo audio signal with the video signal (audio-follow-video) when switching the active input to the output

￿￿Includes a DEFAULT SELECT switch for selecting the computer graphics master (default) source signal

￿￿Includes a looping XGA input

￿￿Comes with contact closure remote control for forced operation

￿￿Includes a CAT5 output (for video) via an 8 PIN terminal block connector

￿￿Is powered by a standard 12 Volt DC feed

2

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model Tables Contents2900-9999992 Introduction About the Power Connect FeatureGetting Started OverviewAbout the WP-211DS Shielded Twisted Pair STP / Unshielded Twisted Pair UTPRecommendations for Achieving the Best Performance Your WP-211DSDefine the rear panel of the WP-211DS Installing the WP-211DS Using the WP-211DSCAT5 Pinout Wiring the CAT5 Line in / Line OUT RJ-45 ConnectorsExample of a WP-211DS Installation Connecting the WP-211DSOperating using the Default Master Source Signal Selection Remote Terminal Block Connector Connecting the Remote ConnectorIncludes the technical specifications Technical SpecificationsOnly the first purchase customer may enforce this warranty 2900-78 REV

WP-211DS specifications

The Kramer Electronics WP-211DS is a versatile wall plate designed for data and video signal transmission, making it an ideal solution for both commercial and residential AV installations. This wall plate serves as an elegant and user-friendly interface for connecting various video and audio sources to a display or projector.

One of the standout features of the WP-211DS is its dual input configuration, which includes HDMI and VGA ports. This provides users with the flexibility to connect multiple devices without the need for cumbersome adapters or converters. The unit supports resolutions of up to 1920x1200 for VGA and up to 4K for HDMI, ensuring that it is capable of handling high-definition video signals.

Additionally, the WP-211DS features a built-in audio input that can transmit sound signals from connected devices. This is particularly beneficial in environments such as classrooms, conference rooms, or home theaters where audio and video quality are critical. The wall plate simplifies the connectivity process, allowing users to easily switch between sources without complications.

The design of the WP-211DS is sleek and unobtrusive, making it an aesthetically pleasing addition to any room. It fits flush against the wall, maintaining a clean look while providing robust functionality. The unit's installation is straightforward and can typically be completed in minutes, making it a favorite among AV professionals and DIY enthusiasts alike.

In terms of technology, the WP-211DS is designed to be compatible with various Kramer products, allowing for seamless integration into existing AV systems. The device also utilizes advanced signal processing to ensure high-quality transmission with minimal signal degradation over distances.

The WP-211DS is built with reliability in mind. It features high-quality connectors and robust construction to withstand the demands of regular use in busy environments. With a focus on user experience, the wall plate’s intuitive labeling and plug-and-play capabilities mean that anyone can connect their devices without having to decipher complex instructions.

Overall, the Kramer Electronics WP-211DS is a powerful solution for anyone looking to streamline their AV connections in a stylish and efficient manner, combining functionality, quality, and ease of use in one compact package.
Top Page Image Contents