Guardian Technologies GGU350TT warranty Hose Cradle Assembly, Hose Assembly

please read all instructions before using this appliance

WARNING! Do not use the Dirt Cup Handle to move the cleaner.

THERMAL RESET BUTTON:

Operates due to overheating, caused by a full dirt cup, clogged filter or blocked pipes.

Unplug the cleaner and remove the blocked materials. To operate again, after cooling down the cleaner about 30 minutes, press the Thermal Reset Button.

Model	GGU350TT	Cord Length	32 feet
Rating	120V/60Hz	Inner Filter	HEPA Filter
Amperage	12 amps	Exhaust Filter	Micron Filter
Weight (Net)	20.50 lbs	Headlight	Yes
Dimensions	15" x 14" x 45.25"	Belt	Yes

Hose Cradle Assembly

HOSE CRADLE ASSEMBLY

•Set hose cradle on the top of the cleaner. (Fig. 1)

•Using a Phillips screwdriver, secure the 3/4-inch screw.

Fig. 1

Main Power	Brush Power
Switch	Switch

O	H
P

W				S
E	R		U
		R
		B

Dirt Cup

Filter

Dirt Cup Handle

Height

Setting

Height Adjustment

KnobControl

Canister

Release Pedal

Headlight

Handle Cord Clip

Handle Hose Connector

Handle(TOOLS/CANISTER MODE)

Extension

Button

Handle Inlet
Hose Connector
Canister
Handle	Hose Cradle
	Hose

		Hose Clip
	Body	Handle Removal
		Button
	Cord
	Storage
	Hooks
		Base Hose
		Connector
		(UPRIGHT MODE)
		Handle Release
		Pedal
Base	Thermal Reset
	Button	Cord
		Plug

Vacuum Assembly: upright Use

Hose Assembly

HOSE ASSEMBLY

•Insert the body end of the hose into the hose inlet on the top of the cleaner. (Fig. 2)

•Line up circular tab on hose cuff with inner groove. (Fig. 2)

•Connect and twist clockwise to secure proper hose connection. (Fig.3)

•Place hose in hose cradle. (Fig. 4)

•Insert the base end of the hose into the hose inlet on the base of the cleaner. (Fig. 5)

IMPORTANT: Hose must be connected to inlet on base of vacuum to work in the UPRIGHT mode.

		Hose
Fig. 2	Fig. 3	Base Hose
		Connector

Fig. 5

Fig. 4	Detail of
	Hose Lock

E-4 E-5